DIGITAL Laser Printer LN15
Printer Driver for Microsoft Windows NT4.0 (English language version)


Note : This is the driver for the English language version of Windows NT4.0.
       Do not install this driver on a version of Windows NT4.0 other than the
       English language version as this will cause printer dialog boxes to
       display in English rather than the language of the installed Windows NT
       version 4.0 .


<Overview of Contents>
     This document explains the items listed below. The driver should be used
     only after this document has been read.

     Introduction
     File Composition
     Installation Guide
     Points to Note


<Introduction>
   The printer driver has drivers for the following model.

      DIGITAL Laser Printer LN15

<File composition>
     The following files are necessary for the printer driver.
      DECLN40.INF   Information file used for installing the printer driver.
      DECLN40.DLL   Printer driver module.
      READMENT.TXT  Contains explanation and points to note for the printer
                    driver.


<Installation Guide>
   The printer driver can be installed by the method described below.

   Set-up from Printers folder.

    (a)Click the Start button, point to Settings, and then click Printers.

    (b)Double-click Add Printer.

    (c)The Add Printer Wizard appears, then choose the location. Click "Next>".

    (d)Select the printer port. Click "Next>".

    (e)Click "Have Disk" from the next dialog and the "Install from disk"
       dialog box is displayed prompting the user to select the drive and
       directory containing the installation disk.

    (e)Insert the printer driver installation disk into the A: drive,
       type "A:\" and click "OK".

    (f)A dialog box appears displaying the model name.
       Click "Next>" to continue.

    (g)A list of available ports appears. Select an appropriate port and
       click "Next>".

    (h)A dialog appears prompting the user to type the printer name. Type
       an appropriate name or use the one supplied and click "Next>".

    (i)The next dialog prompts the user to print a test page. Select "Yes"
       or "No" and click "Finish".

    (j)Driver files are copied from the installation disk.

    (k)When all files have been copied and the driver is installed a dialog
       appears querying the result of test page printout. Depending on
       whether the test page was printed correctly or not click "Yes" or "No".

    The Windows NT4.0 printer driver is now installed.


<Points to Note>
   (1)110, 921600 Baud rates are not supported by DIGITAL Laser Printer LN15
      and should not be selected when using the serial port.

   (2)When setting the printer memory option ("Device Settings"-->
      "Installed Memory") this driver only supports settings upto 64MB.
      If more than 64MB are installed in the printer (resident+64MB module)
      please set this setting to 64MB(65536).

   (3)There is the item "Soft Fonts" in "Device Settings" setting from
      "Properties". Setting "Soft Fonts" is not guaranteed with this
      Printer Driver.

   (4)When the front page and back page settings, such as paper source,
      paper size or print direction, are the same, the printer will print
      according to example #1.
      When any of these settings are different the printer will print
      according to example #2.

      Example #1 :
        Application     Printer
        ---------------------------------
        Page 1->A4      Page 1 front ->A4
        Page 2->A4      Page 1 back  ->A4
        Page 3->A5      Page 2 front ->A5
        Page 4->A5      Page 2 back  ->A5

      Example #2 :
        Application     Printer
        ---------------------------------
        Page 1->A4      Page 1 front ->A4
        Page 2->A5      Page 2 front ->A5
        Page 3->A5      Page 2 back  ->A5
        Page 4->A5      Page 3 front ->A5


Microsoft and Windows NT are registered trademarks of Microsoft Corporation.
