----------------------------------------------------------------------
Digital LN17 Printer Driver for Microsoft Word Version 6.0 for DOS
----------------------------------------------------------------------

October 1995

  (c) 1995 by Digital Equipment Corporation. All rights reserved.
     
   Copyright protection claimed includes all forms and matters of
   copyrightable material and information now allowed by statutory or
   judicial law or hereinafter granted, including, without limitation,
   material generated from the software programs which are displayed
   on the screen, such as icons, screen displays, looks, etc.

   Digital(R) and all Digital products mentioned in this document are
   trademarks of Digital Equipment Corporation.

   Digital is not an agent or representative of any software manufacturer
   or vendors mentioned in this document. Digital does not warrant or
   represent the products or services of these manufacturers or vendors
   to meet the needs or expectations of any purchaser or user of said
   products or services.  Nothing concerning these products shall be
   construed to constitute an endorsement by Digital of any product,
   service or supplier described in this document.
     
   Changes are periodically made to this document . Changes, technical
   inaccuracies, and typographic errors will be corrected in subsequent
   releases.


Installation Procedure

   The Digital LN17 DOS WORD printer driver is installed using the method
   described in the DOS WORD documentation.  The method is as follows:

   1. Install DOS WORD 6.0 using the installation procedure as
      described in DOS WORD 6.0 product documentation.  Complete the
      DOS WORD 6.0 installation process and return to the DOS prompt.

   2. Place the Digital LN17 WORD 6.0 for DOS installation diskette in the
      PC's floppy drive.

   3. Copy the DECLN17.PRD and .INI files from the installation diskette
      to the current WORD directory.  Use the /b option when using the
      DOS Copy command.

   4. Start the DOS WORD program by executing WORD.

   5. After DOS WORD displays its main menu screen, select FILE, then 
      select PRINTER SETUP, then select the LN17(version letter).PRD
      file from the list.  The printer defaults will appear.  You may
      make changes to the defaults at this time.  

   6. Select the OK button to complete the printer driver installation.


Copyright (c)  1995 by Digital Equipment Corporation.
