DIGITAL Laser Printer LNC02 Printer Driver and Utility Software

File: C02_P33E.ZIP
Version 1.0

-----

NOTICE: This software package is provided under license from GENICOM
Corporation and other third parties. Please review the Software License
Agreement in the file LICENSE.TXT before using or copying this product.

-----

CAUTION: You must install the correct printer driver for the type of
Windows NT 4.0 computer you have. This package contains software for
Alpha-based Windows NT systems.

-----

INSTALLATION

NOTE: If you have previously installed a PostScript printer driver for
your DIGITAL Laser Printer LNC02, first perform the RE-INSTALLATION
procedure, described in the next section.

 1) Save the files from this archive on your Windows NT 4.0 system.

 2) Start the Add Printer wizard, in the Printers folder, of your system.

 3) Click on "Next", then select whether the printer is attached to
    your workstation (either with a physical port or a DIGITAL Network
    Port) or is available on the Network as a shared printer. Click
    "Next" after making this selection.

    (You may wish to create a new Digital Network Port for your DIGITAL 
    Laser Printer LNC02. Refer to the instructions in the Network
    Interface and Network Software Setup Guide to add a DIGTIAL Network
    Port to your Windows NT 4.0 system.)

 4) Click on "Have Disk" when the list of printer drivers is shown.

 5) When prompted, browse to the folder on your hard drive where
    you saved the files from this archive.

 6) Click on "OK". Then select "DIGITAL Laser Printer LNC02" in the next
    dialog box that appears and click "Next".

 7) When you are prompted for a printer name, either accept the
    displayed  name or type a new one, and then click "Next".

 8) If you plan to share your LNC02 printer, you can turn on sharing
    at this point. However, do NOT select additional operating system
    drivers at this point. Click "Next" when you are finished with this
    dialog box.

    (You can install the other Windows NT 4.0 printer driver for your 
    DIGITAL Laser Printer LNC02, however, you cannot install any of the
    other operating system printer drivers because they are not
    compatible with the advanced Windows NT 4.0 printer driver. You can
    install the  alternate Windows NT 4.0 printer driver at a later time
    from the Sharing tab of the printer property sheets.)

 9) You will be asked to print a test page. This will help verify that
    your installation was successful. Click on "Finish".

10) The printer driver will install automatically and a new icon for your
    DIGITAL Laser Printer LNC02 will appear in the Windows NT 4.0 system 
    folder. Installation is complete.

RE-INSTALLATION PROCEDURE
-------------------------

If you have previously installed a PostScript printer driver for your
DIGITAL Laser Printer LNC02, first perform the following procedure.
 
 1) Open the Printers folder on your Windows NT 4.0 system.

 2) Select the icon for your DIGITAL Laser Printer LNC02.

 3) From the File menu, choose Delete and confirm deletion of the
    printer.
 
    (If you have more than one LNC02 printer installed, repeat this
    process for each printer.)

 4) Install the new DIGITAL Laser Printer LNC02 printer driver, 
    making sure to indicate that you want to replace the existing
    printer driver when prompted.

-----

DIGITAL Printer Products on the Internet: http://www.printers.digital.com/

DIGITAL and the DIGITAL logo are trademarks of Digital Equipment
Corporation. GENICOM is a registered trademark of GENICOM Corporation.
GENICOM is the exclusive supplier of DIGITAL-branded printer products.

Adobe, Acrobat and PostScript are trademarks of Adobe Systems
Incorporated and may be registered in certain jurisdictions. Macintosh
is a registered trademark of Apple Computer, Inc. UNIX is a registered
trademark of X/Open Company, Ltd. Microsoft and Windows are registered
trademarks and Windows NT are trademarks of Microsoft Corporation.
PANTONE is a registered trademark of Pantone, Incorporated. PANTONE is
Pantone, Incorporated's check-standard trademark for color reproduction
and color reproduction materials. All other trademarks and registered
trademarks are the property of their respective holders.

Copyright 1998, GENICOM Corporation. All rights reserved.
