When you right-click on the Hardware icon, the following menu options appear. Some items are not active (grayed out) unless you have taken exclusive control of the AMU system.
|
Turn On All Cable LEDs... |
Brings up the Interval Timer dialog box. The interval is the number of seconds to keep the LEDs lit. The maximum value is 3600 (1 hour). Tests the LEDs; all IP and I/O cable port LEDs blink until the interval timer elapses. |
|
Turn Off All Cable LEDs |
Stops blinking by dimming the LEDs. |
|
Reconfigure Cabling |
Manually reconfigures the cabling database. Cabling is reconfigured whenever a hard partition is powered on, but Reconfigure Cabling may be selected if manual reconfiguration is needed. |
|
Refresh Hardware |
Refreshes the display by querying the hardware for new data. |
|
IP Cable Connections |
Displays the IP Cable Connections Properties display. |
|
IO Cable Connections |
Displays the IO Cable Connections Properties display. |
|
Properties |
Displays the Platform Hardware Properties display. |