F!INTOUCH® 4GL Y

INTOUCH^® 4GL
A Guide to the INTOUCH Language

7| First page |1

Table of Contents (summary)

Chapter 1 Working in the INTOUCH EnvironmentS
Chapter 2 INTOUCH Commandsg
Chapter 3 Program Elements and Data in INTOUCHi
Chapter 4 Writing and Debugging INTOUCH Programsf
Chapter 5 Inputting and Storing Terminal Data_
Chapter 6 Printing and Displaying DataU
Chapter 7 Program DirectivesV
Chapter 8 Assigning VariablesY
Chapter 9 Set and Ask StatementsT
Chapter 10 Defining Arraysq
Chapter 11 Loops, Conditionals, Chaining and Branching W
Chapter 12 Exception Handlingp
Chapter 13 Calling Routines Written In Other Languages^
Chapter 14 Data Structure StatementsR
Chapter 15 File Handlingv
Chapter 16 Creating Structures, Field Definitions with SETUP^
Chapter 17 INTOUCH Running Under VMSW
Appendix A Built-in FunctionsS
Appendix B Reserved Wordsk
Appendix C INTOUCH's Error and Exception MessagesX
Appendix D ASCII Character Setl
Appendix E Creating Libraries for Use with INTOUCH`
Appendix F INTOUCH Database Interfaces7
Index:
Figures<
Examples8
Tables

'

Table of Contents

Chapter 1 Working in the INTOUCH Environment
- 1.1 Getting StartedW
- 1.2 Accessing the VMS System UtilitiesP
- 1.3 Recalling Previous CommandsQ
- 1.4 Getting Help when in INTOUCHQ
- 1.5 Using INTOUCH--Some Examples
  - 1.5.1 Writing an INTOUCH programU
  - 1.5.2 Running an INTOUCH programg
  - 1.5.3 Interrupting and Changing an INTOUCH program
  H
- 1.6 Using EXIT and BackL
- 1.7 Messages in INTOUCH^
- 1.8 Using the Tab Key Features
  - 1.8.1 Tab Key IndentingQ
  - 1.8.2 Command CompletionR
  - 1.8.3 Spelling CorrectionV
  - 1.8.4 Expanding Abbreviations
  O
- 1.9 Other INTOUCH Features
j
Chapter 2 INTOUCH Commands
- 2.1 Presentation of Command and Statement InformationO
- 2.2 About INTOUCH CommandsI
- 2.3 INTOUCH Commands
  - 2.3.1 NEWC
  - 2.3.2 SAVEF
  - 2.3.3 REPLACED
  - 2.3.4 ABORTJ
  - 2.3.5 RUN and RNHB
  - 2.3.6 OLDC
  - 2.3.7 LISTI
  - 2.3.8 LIST ERRORC
  - 2.3.9 EDITI
  - 2.3.10 RENUMBERO
  - 2.3.11 FRAME ON | OFFH
  - 2.3.12 REFRESHD
  - 2.3.13 IDEH
  - 2.3.14 COMPILE
    - 2.3.14.1 Compiled Images^
    - 2.3.14.2 Running Compiled Images
    \
  - 2.3.15 Developing INTOUCH ProgramsC
  - 2.3.16 GOG
  - 2.3.17 UNSAVE
~
Chapter 3 Program Elements and Data in INTOUCH
- 3.1 INTOUCH Program Elements
  - 3.1.1 Continuing Program LinesE
  - 3.1.2 LabelsW
  - 3.1.3 Storing INTOUCH Programs
  H
- 3.2 Data in INTOUCH
  - 3.2.1 Data Types
    - 3.2.1.1 IntegersQ
    - 3.2.1.2 Real NumbersP
    - 3.2.1.3 String Data
    F
  - 3.2.2 BOOLEANJ
  - 3.2.3 ExpressionsH
  - 3.2.4 Constants
    - 3.2.4.1 Numeric constantsO
    - 3.2.4.2 E NotationU
    - 3.2.4.3 String Constants
    H
  - 3.2.5 Variables
    - 3.2.5.1 ArraysO
    - 3.2.5.2 Substrings
    S
  - 3.2.6 Structure ReferencesY
  - 3.2.7 Multiple Occurrence FieldsS
  - 3.2.8 Compound Expressions
    - 3.2.8.1 Numeric ExpressionsW
    - 3.2.8.2 String Expressions\
    - 3.2.8.3 Conditional Expressions
    R
  - 3.2.9 Order of Evaluation
€
Chapter 4 Writing and Debugging INTOUCH Programs
- 4.1 Comments
  - 4.1.1 REMM
  - 4.1.2 ! comment_texta
  - 4.1.3 ~ Used to Border Part of a Program
  _
- 4.2 PROGRAM, END, STOP and HALT Statements
  - 4.2.1 PROGRAMB
  - 4.2.2 ENDC
  - 4.2.3 STOPC
  - 4.2.4 HALTH
  - 4.2.5 RANDOMIZE
  I
- 4.3 Debug FacilitiesE
- 4.4 DEBUG ON/OFF
  - 4.4.1 DEBUG ONH
  - 4.4.2 DEBUG OFF
  U
- 4.5 Monitoring Program ExecutionZ
- 4.6 The TRACE and STATISTICS Features
  - 4.6.1 TRACE ONH
  - 4.6.2 TRACE OFFG
  - 4.6.3 STATS ONH
  - 4.6.4 STATS OFFI
  - 4.6.5 LIST STATS
  G
- 4.7 BREAK and STEP
  - 4.7.1 BREAKC
  - 4.7.2 STEP
  Y
- 4.8 GO--Continuing Program Execution
  - 4.8.1 GO
}
Chapter 5 Inputting and Storing Terminal Data
- 5.1 INPUT Statement
  - 5.1.1 Types of INPUT StatementsK
  - 5.1.2 INPUT Styles
  F
- 5.2 INPUT Optionsl
- 5.3 INPUT Commands and Keystrokes Available to the User
  - 5.3.1 Editing Input
  J
- 5.4 Inputting StringsU
- 5.5 Inputting Multiple Variables
  - 5.5.1 Simple Input StatementS
  - 5.5.2 LINE INPUT Statement
  V
- 5.6 INPUT Default Prompt and TextF
- 5.7 PROMPT OptionB
- 5.8 AT OptionJ
- 5.9 ATTRIBUTES OptionH
- 5.10 LENGTH OptionI
- 5.11 DEFAULT Option
  - 5.11.1 Pre-positioning to a DEFAULT Menu Item
  G
- 5.12 ERASE OptionG
- 5.13 VALID OptionI
- 5.14 TIMEOUT OptionF
- 5.15 AREA OptionH
- 5.16 SCREEN Option
  - 5.16.1 Screen Format CharactersV
  - 5.16.2 Screen Format Optionsi
  - 5.16.3 The User's Response to the SCREEN Option
  F
- 5.17 MENU Option
  - 5.17.1 Items
    - 5.17.1.1 DescriptionsQ
    - 5.17.1.2 Data Value
    R
  - 5.17.2 Submenu IndicatorQ
  - 5.17.3 Menu DIRECTIVES:O
  - 5.17.4 User Interface
  D
- 5.18 KEY INPUT
v
Chapter 6 Printing and Displaying Data
- 6.1 PRINT
  - 6.1.1 Printing Multiple ExpressionsK
  - 6.1.2 TAB FunctionH
  - 6.1.3 AT OptionK
  - 6.1.4 ERASE OptionJ
  - 6.1.5 WIDE OptionO
  - 6.1.6 Printing Numbersr
  - 6.1.7 Positioning the Cursor for the Next Print Statementh
  - 6.1.8 Printing Attributes--Highlighting OptionsK
  - 6.1.9 USING OptionG
  - 6.1.10 Fields
    - 6.1.10.1 String Format Characters`
    - 6.1.10.2 Numeric Format Characters
    K
  - 6.1.11 Directives
    - 6.1.11.1 {UCASE}?O
    - 6.1.11.2 {LCASE}?O
    - 6.1.11.3 {HYPHEN}Y
    - 6.1.11.4 {DATE [argument]}?R
    - 6.1.11.5 {ROTATE n}?N
    - 6.1.11.6 {TIME}?Q
    - 6.1.11.7 {ZIPCODE}?
  Q
- 6.2 Using the INTOUCH Screen@
- 6.3 MESSAGE>
- 6.4 DELAY>
- 6.5 CLEART
- 6.6 OPTION COMMUNICATE ON | OFF
l
Chapter 7 Program Directives
- 7.1 Compile Directivesp
  - 7.1.1 %MESSAGEhM
  - 7.1.2 %MESSAGE ERRORoG
  - 7.1.3 %INCLUDEsS
  - 7.1.4 %INCLUDE CONDITIONAL=E
  - 7.1.5 %DEBUGp
  e
gm
Chapter 8 Assigning Variablest
- 8.1 DECLARE
  - 8.1.1 DECLARE STRUCTUREM
  - 8.1.2 DECLARE PREFIX
  iJ
- 8.2 OPTION Statements
  - 8.2.1 OPTION REQUIRE DECLAREgJ
  - 8.2.2 OPTION BASE
  A<
- 8.3 LETL
- 8.4 LSET, RSET and CSET
  - 8.4.1 LSETD
  - 8.4.2 RSET C
  - 8.4.3 CSETl
  rN
- 8.5 LSET, RSET, CSET FILLW
- 8.6 DATA, READ, RESTORE Statements
  - 8.6.1 READ6F
  - 8.6.2 RESTORE
  i
Sp
Chapter 9 Set and Ask Statements
- 9.1 SET AUTOEXITJ
- 9.2 SET BACK ON | OFF
  - 9.2.1 SET BACK ONK
  - 9.2.2 SET BACK OFFt
  aK
- 9.3 SET ERROR ON | OFFt
  - 9.3.1 SET ERROR ON L
  - 9.3.2 SET ERROR OFF
  eC
- 9.4 ASK ERRORS_J
- 9.5 SET EXIT ON | OFF
  - 9.5.1 SET EXIT ONK
  - 9.5.2 SET EXIT OFF>
  =J
- 9.6 SET HELP ON | OFF
  - 9.6.1 SET HELP ONK
  - 9.6.2 SET HELP OFFg
  sG
- 9.7 ASK KEYSTROKESlI
- 9.8 ASK | SET MARGIN"
  - 9.8.1 ASK MARGINUI
  - 9.8.2 SET MARGINa
  dN
- 9.9 ASK | SET MESSAGELINE
  - 9.9.1 ASK MESSAGELINEN
  - 9.9.2 SET MESSAGELINE
  6G
- 9.10 ASK PAGESIZE7L
- 9.11 SET PORT ON | OFF
  - 9.11.1 SET PORT ONM
  - 9.11.2 SET PORT OFF
  nH
- 9.12 ASK RESPONSESE
- 9.13 SET SCROLL.I
- 9.14 ASK | SET SEEDeK
- 9.15 ASK | SET SYSTEMa
  - 9.15.1 ASK SYSTEM: COMMENTT
  - 9.15.2 SET SYSTEM: COMMENTV
  - 9.15.3 ASK SYSTEM: DIRECTORYV
  - 9.15.4 SET SYSTEM: DIRECTORY[
  - 9.15.5 ASK SYSTEM, LOGICAL: VALUE [
  - 9.15.6 SET SYSTEM, LOGICAL: VALUE 9.15.7 ASK SYSTEM: MODEaV
  - 9.15.8 ASK SYSTEM: PARAMETERZ
  - 9.15.9 ASK SYSTEM, PASS: SUCCESSV
  - 9.15.10 ASK SYSTEM: PROCESSV
  - 9.15.11 SET SYSTEM: PROCESSU
  - 9.15.12 ASK SYSTEM: RIGHTS#\
  - 9.15.13 ASK SYSTEM, SYMBOL: VALUE\
  - 9.15.14 SET SYSTEM, SYMBOL: VALUES
  - 9.15.15 ASK SYSTEM: USER1
  lK
- 9.16 ASK | SET WINDOW_
  - 9.16.1 ASK WINDOW AREAP
  - 9.16.2 SET WINDOW AREAS
  - 9.16.3 ASK WINDOW: COLUMN2S
  - 9.16.4 SET WINDOW: COLUMN Z
  - 9.16.5 ASK | SET WINDOW: CURRENTQ
  - 9.16.6 ASK WINDOW: DATAnQ
  - 9.16.7 SET WINDOW: DATAmY
  - 9.16.8 ASK | SET WINDOW: KEYMAPI\
  - 9.16.9 SET WINDOW KEYSTROKE: VALUER
  - 9.16.10 ASK WINDOW: ROWR
  - 9.16.11 SET WINDOW: ROWX
  - 9.16.12 ASK WINDOW: TYPEAHEADX
  - 9.16.13 SET WINDOW: TYPEAHEAD
  yN
- 9.17 ASK | SET ZONEWIDTH
  - 9.17.1 ASK ZONEWIDTHN
  - 9.17.2 SET ZONEWIDTH
  a
l
Chapter 10 Defining Arrays
- 10.1 Dimensioning Arrays
  - 10.1.1 DIMF
  - 10.1.2 REDIML
  - 10.1.3 OPTION BASE
  r
a‰
Chapter 11 Loops, Conditionals, Chaining and Branching
- 11.1 FOR/NEXT Loop
  - 11.1.1 The STEP OptionN
  - 11.1.2 Nesting LoopsI
  - 11.1.3 EXIT FOR"K
  - 11.1.4 REPEAT FOR#L
  - 11.1.5 ITERATE FOR
  aB
- 11.2 DO LOOP
  - 11.2.1 WHILE and UNTIL OptionsH
  - 11.2.2 EXIT DOJ
  - 11.2.3 REPEAT DOK
  - 11.2.4 ITERATE DOp
  aB
- 11.3 EXECUTEG
- 11.4 ConditionalsCM
- 11.5 IF/THEN ... END IF.
  - 11.5.1 ELSE OptionN
  - 11.5.2 ELSEIF Option
  rQ
- 11.6 SELECT CASE/END SELECTM
  - 11.6.1 CASE expr, expr, expr....Q
  - 11.6.2 CASE ELSE Option>O
  - 11.6.3 CASE IS Option>
  rI
- 11.7 CHAIN Programsa`
- 11.8 Pass Commands to the Operating System
  - 11.8.1 PASS [NOWAIT: | NORETURN:]a
  >D
- 11.9 Branching
  - 11.9.1 Branching and Code Blocks
  "A
- 11.10 GOTO
  - 11.10.1 ON...GOTO...[ELSE]>
    - 11.10.1.1 ELSE Option
    0
  dI
- 11.11 GOSUB/RETURNn
  - 11.11.1 GOSUBM
  - 11.11.2 ON...GOSUBT
    - 11.11.2.1 ELSE Option
  11.12 DISPATCH P
- 11.13 ROUTINE/END ROUTINE
  - 11.13.1 EXIT ROUTINE>Q
  - 11.13.2 REPEAT ROUTINEl
  m
ao
Chapter 12 Exception Handling
- 12.1 CAUSE EXCEPTIONL
- 12.2 WHEN EXCEPTION INM
- 12.3 WHEN EXCEPTION USE
  12.4 HANDLER Routine Actions
  - 12.4.1 RETRYI
  - 12.4.2 CONTINUEaG
  - 12.4.3 RESUME M
  - 12.4.4 EXIT HANDLERf
  0
eˆ
Chapter 13 Calling Routines Written In Other Languages
- 13.1 LIBRARY?
- 13.2 CALLm
  - 13.2.1 Optional ArgumentsnS
  - 13.2.2 Passing Mechanismsi
Chapter 14 Data Structure Statements
- 14.1 General InformationI
- 14.2 OPEN STRUCTUREP
  - 14.2.1 ACCESS OptionL
  - 14.2.2 LOCK OptionP
  - 14.2.3 DATAFILE Option
  MU
- 14.3 CLOSE STRUCTURE struc_name>H
- 14.4 ADD STRUCTURE
  - 14.4.1 CANCEL ADDCI
  - 14.4.2 EXIT ADD"
  mK
- 14.5 DELETE STRUCTURETR
- 14.6 LOCK | UNLOCK STRUCTUREL
- 14.7 EXTRACT STRUCTURE
  - 14.7.1 INCLUDE StatementR
  - 14.7.2 EXCLUDE StatementO
  - 14.7.3 SORT Statement1N
  - 14.7.4 FOR EACH/NEXTW
  - 14.7.5 EXTRACT STRUCTURE: KEY.f
  - 14.7.6 EXTRACT STRUCTURE, FIELD: PARTIAL KEYO
  - 14.7.7 CANCEL EXTRACTtM
  - 14.7.8 EXIT EXTRACTnT
  - 14.7.9 REEXTRACT STRUCTURE\
  - 14.7.10 EXTRACT STRUCTURE: APPEND`
  - 14.7.11 EXTRACT STRUCTURE, SET, USINGe
  - 14.7.12 EXTRACT STRUCTURE, SET, FIELD: KEYm
  .H
- 14.8 ASK STRUCTURE
  - 14.8.1 ASK STRUCTURE FIELD: item
    - 14.8.1.1 FIELD ExpressionsS
    - 14.8.1.2 Item: ACCESSnX
    - 14.8.1.3 Item: APPLICATIONW
    - 14.8.1.4 Item: ATTRIBUTESFW
    - 14.8.1.5 Item: CHANGEABLE"[
    - 14.8.1.6 Item: CLASSIFICATION1U
    - 14.8.1.7 Item: DATATYPE0X
    - 14.8.1.8 Item: DESCRIPTIONT
    - 14.8.1.9 Item: HEADINGS
    - 14.8.1.10 Item: HELPtT
    - 14.8.1.11 Item: KEYEDU
    - 14.8.1.12 Item: LENGTHtS
    - 14.8.1.13 Item: NAMElS
    - 14.8.1.14 Item: NULLiU
    - 14.8.1.15 Item: NUMBER0X
    - 14.8.1.16 Item: OPTIMIZEDW
    - 14.8.1.17 Item: POSITION>X
    - 14.8.1.18 Item: PRINTMASKU
    - 14.8.1.19 Item: PROMPTmY
    - 14.8.1.20 Item: SCREENMASK>U
    - 14.8.1.21 Item: VRULES
    W
  - 14.8.2 ASK STRUCTURE: CURRENT V
  - 14.8.3 ASK STRUCTURE: FIELDST
  - 14.8.4 ASK STRUCTURE: KEYSZ
  - 14.8.5 ASK STRUCTURE: CAPABILITYY
  - 14.8.6 ASK STRUCTURE: EXTRACTED 14.8.7 ASK STRUCTURE: IDW
  - 14.8.8 ASK STRUCTURE: POINTERrV
  - 14.8.9 ASK STRUCTURE: RECORD\
  - 14.8.10 ASK STRUCTURE: RECORDSIZEX
  - 14.8.11 ASK STRUCTURE: ACCESS^
  - 14.8.12 ASK |SET STRUCTURE: TIMEOUTi
  - 14.8.13 ASK | SET STRUCTURE #string_expr . . .X
  - 14.8.14 ASK STRUCTURE: ENGINE
  4H
- 14.9 SET STRUCTURE
  - 14.9.1 SET STRUCTURE: CURRENTdZ
  - 14.9.2 SET STRUCTURE, FIELD: KEYb
  - 14.9.3 SET STRUCTURE, FIELD: PARTIAL KEYR
  - 14.9.4 SET STRUCTURE: IDW
  - 14.9.5 SET STRUCTURE: POINTERiV
  - 14.9.6 SET STRUCTURE: RECORD[
  - 14.9.7 SET STRUCTURE: EXTRACTED 0_n
  - 14.9.8 SET STRUCTURE, SET, USING: EXPRESSION 'owner'g
  - 14.9.9 SET STRUCTURE, SET: EXPRESSION 'owner'ah
  - 14.9.10 SET STRUCTURE, SET, USING, FIELD: KEY\
  - 14.9.11 SET STRUCTURE, SET, USING
  R
j
Chapter 15 File Handling
- 15.1 OPEN #chnl_num: NAME ...#
  - 15.1.1 OPEN Options#
    - 15.1.1.1 ACCESS OptionY
    - 15.1.1.2 UNFORMATTED OptionOZ
    - 15.1.1.3 OPTIMIZE OFF OptionT
    - 15.1.1.4 UNIQUE Option
    >
  fJ
- 15.2 CLOSE #chnl_numJ
- 15.3 PRINT #chnl_numW
- 15.4 INPUT #chnl_num: var, var..."
  - 15.4.1 Inputting Multiple Variablesd
  Kd
- 15.5 LINE INPUT #chnl_num: str_var, str_var...
  - 15.5.1 EOF Option/S
  - 15.5.2 Multiple Variablesa
  >I
- 15.6 ASK #chnl_num:u
  - 15.6.1 ASK Options
  N
- 15.7 SET #chnl_num: expr
  - 15.7.1 SET #chnl_num: Options_
  aI
- 15.8 Deleting Filesg
  - 15.8.1 KILL"
  S
aŽ
Chapter 16 Creating Structures, Field Definitions with SETUP
- 16.1 SETUP--Overview
  - 16.1.1 Entering SETUPa
  "H
- 16.2 SETUP Prompts
  - 16.2.1 Structure NamelP
  - 16.2.2 Database engineH
  - 16.2.3 DatasetP
  - 16.2.4 Data dictionary
  lK
- 16.3 SETUP Procedures1K
- 16.4 DEFINE Procedure
  - 16.4.1 Field name O
  - 16.4.2 Classification#L
  - 16.4.3 DescriptionJ
  - 16.4.4 Data typeO
  - 16.4.5 First position#M
  - 16.4.6 Field lengthuV
  - 16.4.7 Number of occurrencesJ
  - 16.4.8 SemanticsL
  - 16.4.9 Prompt textQ
  - 16.4.10 Report heading.M
  - 16.4.11 Print mask>N
  - 16.4.12 Screen maskL
  - 16.4.13 Help textO
  - 16.4.14 Access rulesDS
  - 16.4.15 Validation rulesO{
  - 16.4.16 Field Definitions and Key Fields --- General Information.
  "I
- 16.5 SHOW Procedure<
  - 16.5.1 Brief Field DisplayS
  - 16.5.2 Full Field Display"T
  - 16.5.3 List Fields DisplayR
  - 16.5.4 Structure Display
  U
- 16.6 MODIFY STRUCTURE Procedure=
  - 16.6.1 Modify Structure General Informationaf
  - 16.6.2 Modify Structure Security Information
  .K
- 16.7 CREATE ProcedureeW
- 16.8 Defining COBOL Record Fieldsl
  - 16.8.1 Define ExampleT
  >
lv
Chapter 17 INTOUCH Running Under VMS
- 17.1 File Specifications
Fo
Appendix A Built-in Functions
- A.1 System FunctionslH
- A.2 Other Functions
.k
Appendix B Reserved Wordsaƒ
Appendix C INTOUCH's Error and Exception Messages.
- C.1 Compile Errors C
- C.2 Exceptions
1p
Appendix D ASCII Character Set„
Appendix E Creating Libraries for Use with INTOUCHx
Appendix F INTOUCH Database Interfaces
- F.1 Supported Database Engines
>;
Indexi)
Examplesl
- 1-1 The INTOUCH Screen FrameX
- 1-2 Running a VMS System Utility ProgramM
- 1-3 The INTOUCH HELP Facility>L
- 1-4 Writing a Sample ProgramQ
- 1-5 INTOUCH Program Error Message N
- 1-6 Running an INTOUCH ProgramS
- 1-7 Interrupting an INTOUCH Program"I
- 1-8 Listing Program LinesgV
- 1-9 Resuming INTOUCH Program ExecutionT
- 3-1 Executing an INTOUCH programB
- 3-2 StructuresN
- 4-1 Debug TRACE ON ExampleZ
- 4-2 Listing Statistics in DEBUG SystemS
- 4-3 Using BREAK in DEBUG System"R
- 4-4 Using STEP in DEBUG SystemP
- 4-5 Using GO in DEBUG SystemF
- 16-1 To Use SETUPG
- 16-2 SETUP Prompts J
- 16-3 SETUP ProceduresW
- 16-4 Field Definition Input Screen n
- 16-5 DEFINE Screen showing field class generated defaultsh
- 16-6 DEFINE Screen showing SETUP generated defaults\
- 16-7 SHOW - Brief Field Display Example[
- 16-8 SHOW - Full Field Display Examplen\
- 16-9 SHOW - Fields List Display Example\
- 16-10 SHOW - Structure Display Example]
- 16-11 CREATE Procedure RMS Input Screen.
/'
Figures1
- 16-1 Character Positions
.%
Tablese
- 3-1 E NotationR
- 9-1 Supported Keystroke ConceptsG
- 14-1 Structure Types>^
- A-1 CONVERT$ Function - Supported Data TypesU
- A-2 DATE$ Function - Integer ValuesaT
- A-3 DAYS Function - Integer ValuesW
- A-4 EDIT$ Function - Operation ValuesrW
- A-5 FORMAT$ Function - Date ArgumentsY
- A-6 FULLTIME$ Function - Integer Values I
- D-1 ASCII Character Set

1@

| Next page... | l