Specify common network information. Select the Network (Common) tab in the Environment Setting Utility dialog box.

This dialog box enables you to specify the following information:

Settings	Description
Sending timeout period	Specify a send timeout value from 1 to 3600 seconds. The default is 30 seconds.
IP address used when multiple IP addresses are configured	If more than one LAN port is installed, select this checkbox, and then specify the IP addresses to be used.

Send timeout period

This is the amount of time the Web console service continues to try sending when a transmission error occurs between the Web console service and the manager service.

Specify network service settings. Select the Network (Service) tab in the Environment Setting Utility dialog box.

This dialog enables you to set the following information:

Settings	Description
Command execution wait time	Specify the amount of time, from 1 to 600 seconds, that the Web console service waits for execution of a command when the same command is requested to the same host from different Web management consoles. The default is 120 seconds.
Command timeout period	Specify the amount of time, from 1 to 6000 seconds, to wait for a reply to a transmission from a Web management console to the Agent service. The default is 120 seconds.
Communications logging	Select this check box to log communications activities. The default is that this check box is selected.

Command timeout period

This is the amount of time the Web management console waits for a response after sending a command to the Agent service.

Specify information about retrying to log in to the manager service after the Web server has been started or when communications with the manager service must be re-established due to an error. To set this information, select the Login tab in the Environment Setting Utility dialog box.

This dialog box enables you to specify the following information:

Settings	Description
Number of login retries	Specify the number of times login can be retried, from 0 to 30 times, when the Web console service logs into the service manager. The default is 0.
Login retry interval	Specify the interval between retries, from 1 to 60 seconds, when login by the Web console service to the service manager is retried. The default is 10 seconds.

Specify whether time differences are to be displayed when you use the Web console service. Select the Display tab in the Environment Setting Utility dialog box.

This dialog box enables you to specify the following information:

Settings	Description
View of Time Differences	To display the time difference, select the View of Time Differences checkbox. The default is that this check box is selected.
Unit of temperature	To display the temperature in Centigrade, select the Centigrade check box. To display the temperature in Fahrenheit, select the Fahrenheit check box. By default, the Fahrenheit check box is selected.