Intel(R) Corporation
Intel® Server Platform SRPL8

The products you are looking for are no longer manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future content updates or software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE PRODUCT SUPPORT DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "TERMS OF USE" INFORMATION.

Information on currently available Intel products is available at www.intel.com and/or developer.intel.com


Identify your products
Product Discontinuance Announcement
Intel® will no longer provide interactive support for these products via telephone or e-mail.

Software and drivers
BIOS/Firmware, drivers, and utilities

Technical specifications
Technical Product Specifications
Product overview, including descriptions and diagrams of the integrated features.
icon Technical Product Specifications [PDF]

Specification update
An update to the specifications contained in the Technical Product Specification.
icon Specification Update [PDF]

Installation and use
AC Input Power Selection
The Intel® Server Platform SRPL8 can operate with input voltages of 200-240VAC or 100-120VAC. A Force_AC_OK jumper (J7F3) located on the midplane board selects the input voltage at which the server will operate. The jumper also enables/disables the brown out recovery feature that aids server startup during slow ramping AC input voltage conditions.
Jumper J7F3 Position | Valid AC Input Range | AC Main | Brown Out Feature Installed | 200-240VAC or 100-120VAC | 15A | Disabled Removed (Default) | 200- 240VAC | 15A | Enabled
Enabling the brown out feature ensures that all power supplies will turn on when the AC input voltage reaches at least 180VAC following an AC main brown out condition.

Model 0 SKU and Intel® Server Platform SRPL8 Integration Kit
The Model 0 SKU (order code - SPM2CBT) of the Intel® Server Platform SRPL8 consists of base configuration. The Model 0 SKU can be integrated for maximum supported processors and memory by adding components included with the SRPL8 Integration Kit (order code - APMKT). The integration kit also contains some other components, like one power supply (for redundancy), front bezel, rack slide rails, etc. Complete contents of the Model 0 SKU and SRPL8 Integration Kit are listed below. Both SPM2CBT and APMKT are sold separately.
The Model 0 SKU is shipped with:
1 SRPL8 processor mezzanine board
1 Memory Carrier (board)
1 Profusion* Carrier (board)
1 I/O Carrier (board)
1 Midplane board
1 I/O rise board
1 Chassis assembly with all cables
1 Front panel board
1 peripheral bay board
1 peripheral bay assembly
2 750W power supplies (Non redundant)
6 Fans for redundant cooling (8 including power supply fans)
2 Hard drive carriers for SCA hot-swappable hard drives
1 3.5"" floppy drive
Dual channel SCSI (LVDS) and graphic controllers are integrated on the server board

NOT included with the Model 0 SKU:
Intel® Pentium® III Xeon® processors
Processor termination assembly - order code PROCTRMASSY. This includes:
One processor bus termination module
One termination card cover
Two latches
Memory DIMMs
Hard drives
CD-ROM drive
Network interface contoller
Operating System software
Power cord (Refer to the power cord specifications)

The SRPL8 Integration Kit includes:
1 SRPL8 processor mezzanine board
1 Memory Carrier
2 Cache coherency filters
1 Power supply (for redundant power)
1 Front Bezel
1 Rack mount slide rail kit
1 Country Kit CD-ROM with the following software:
Intel® Server Control
Drivers and Utilities
Manuals

Power cord specifications
The input connectors used for connection to the rear of the SRPM8 server system are defined by the IEC publication 320, sheets C19 and C20. The connector is rated at 16A/250 (20A in North America) that can be used in an ambient environment up to 65®C. The C20 is in the chassis, and requires a C19 at the end of the power cord.
For North America, the cord must be UL Listed/CSA Certified, 14/3, 75®C type SJT with NEMA 6-15P attachment plug for 110 VAC operation and IEC 320, C19 input connector. Outside North America, the cord must be flexible VDE certified or HAR (harmonized) rated 250 V, 0.75 mm minimum conductor size with IEC 320, C19 input connector. The AC wall attachment plug should be a three conductor grounding type and must be for the configuration in the specific region or country. The AC wall attachment plug must bear the safety agency certification mark for the specific region or country intended for installation.
The cord must be no longer than 4.5 meters (14.76 ft.).
The maximum power consumption expectations are:
12 Amp max at 110 VAC.
7 Amp max 220 VAC.

Product Guide
icon SRPL8_PG [PDF]

Quick Start Guide
icon SRPL8_QSG [PDF]

Compatibility
Tested Hardware and Operating Systems
icon SRPL8_HWOS [PDF]

Tested Processors
Supported Intel® Pentium® III Xeon® Processors
Family Frequency Cache S-Spec #
Pentium III Xeon Processor 700 MHz 1 MB SL3U5
Pentium III Xeon Processor 700 MHz 1 MB SL4GE
Pentium III Xeon Processor 700 MHz 1 MB SL49Q
Pentium III Xeon Processor 700 MHz 1 MB SL4XV
Pentium III Xeon Processor 700 MHz 2 MB SL3X2
Pentium III Xeon Processor 700 MHz 2 MB SL4GG
Pentium III Xeon Processor 700 MHz 2 MB SL49S
Pentium III Xeon Processor 700 MHz 2 MB SL49W
Pentium III Xeon Processor 700 MHz 2 MB SL4XX
Pentium III Xeon Processor 900 MHz 2 MB SL4XZ

Technical advisories
TA 0329: Microsoft* Windows* 2000 May Report Less Than 4GB Memory.
icon TA-0329 [PDF]

TA 0510: Expired License Agreements on Resource CD
To resolve this issue, please download and run LICENSE.HTM
icon TA_510 [PDF]



®Intel Corporation