Historical Archive - Intel® Server Platform SRPM8

Identify your products

Product Discontinuance Announcement: Intel® will no longer provide interactive support for these products via telephone or e-mail.

Technical specifications

Board Technical Product Specifications: Product overview, including descriptions and diagrams of the integrated features.
Technical Product Specifications [PDF]

System Technical Product Specifications: Product overview, including descriptions and diagrams of the integrated features.
Technical Product Specifications [PDF]

Installation and use

AC Input Power Selection: The Intel® Server Platform SRPL8 can operate with input voltages of 200-240VAC or 100-120VAC. A Force_AC_OK jumper (J7F3) located on the midplane board selects the input voltage at which the server will operate. The jumper also enables/disables the brown out recovery feature that aids server startup during slow ramping AC input voltage conditions.
Jumper J7F3 Position | Valid AC Input Range | AC Main | Brown Out Feature Installed | 200-240VAC or 100-120VAC | 15A | Disabled Removed (Default) | 200- 240VAC | 15A | Enabled
Enabling the brown out feature ensures that all power supplies will turn on when the AC input voltage reaches at least 180VAC following an AC main brown out condition.

Model 0 SKU and SRPM8 Integration Kit: The Model 0 SKU (order code - SPMCBT) of the Intel® SRPM8 Server Platform consists of base configuration. The Model 0 SKU can be integrated for maximum supported processors and memory by adding components included with the SRPM8 Integration Kit (order code - APMKT). The integration kit also contains some other components, like one power supply (for redundancy), front bezel, rack slide rails, etc. Complete contents of the Model 0 SKU and SRPM8 Integration Kit are listed below. Both SPMCBT and APMKT are sold separately.

Power cord specifications: The input connectors used for connection to the rear of the SRPM8 server system are defined by the IEC publication 320, sheets C19 and C20. The connector is rated at 16A/250 (20A in North America) that can be used in an ambient environment up to 65®C. The C20 is in the chassis, and requires a C19 at the end of the power cord.
For North America, the cord must be UL Listed/CSA Certified, 14/3, 75®C type SJT with NEMA 6-15P attachment plug for 110 VAC operation and IEC 320, C19 input connector. Outside North America, the cord must be flexible VDE certified or HAR (harmonized) rated 250 V, 0.75 mm minimum conductor size with IEC 320, C19 input connector. The AC wall attachment plug should be a three conductor grounding type and must be for the configuration in the specific region or country. The AC wall attachment plug must bear the safety agency certification mark for the specific region or country intended for installation.
The cord must be no longer than 4.5 meters (14.76 ft.).
The maximum power consumption expectations are:
12 Amp max at 110 VAC.
7 Amp max 220 VAC.

Upgrade Intel® OCPRF100 Server Platform to an Intel® SRPM8 MP Server Platform: srpm8_upgrade [PDF]

Compatibility

Tested Processors: The Intel® SRPM8 MP Server Platform supports certain configurations of the Intel® Pentium® III Xeon® processors 700 and 900 MHz. The Intel® Pentium® III Xeon® processors 500 MHz and 550 MHz are not supported on the SRPM8 platform. Please refer to the Intel SRPM8 Boardset Technical Product Specification or its latest update for a list of supported/unsupported processors.

Technical advisories

TA 0329: Microsoft* Windows* 2000 May Report Less Than 4GB Memory.: TA-0329 [PDF]

TA 0339: Installing Microsoft Windows* NT 4.0 with > 4Gb Memory: TA-339 [PDF]