Intel(R) Corporation

Intel® Server Chassis SC5100

The products you are looking for are no longer manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future content updates or software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE PRODUCT SUPPORT DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "TERMS OF USE" INFORMATION.

Information on currently available Intel products is available at www.intel.com and/or developer.intel.com


Identify your product
Product Discontinuance Announcement
Intel® will no longer provide interactive support for these products via telephone or e-mail.

Software and drivers
BIOS/Firmware, drivers, and utilities

Technical specifications
Technical Product Specifications
Product overview, including descriptions and diagrams of the integrated features.
icon Technical Product Specifications [PDF]

Specification update
An update to the specifications contained in the Technical Product Specification.
icon Specification Update [PDF]

Installation and Use
5.25-inch Drive Bays and Ventilation Panels
Only two of the three bays can be populated. The third location and the one-inch vented panel must be unpopulated, and the vented panels retained as an air inlet, for processor and memory cooling. Without this air inlet the processors may overheat.

DLT Drive upgrade kit
icon DLT_TAPE.PDF

Error: ID# LUN# SAF-TE Disk Config Error
The SAF-TE enclosure is not automatically detecting the drive. To manually include the drive, enter the Storcon utility. F4 for Advanced | Configure Physical Devices | ESG-SHV SCA HSBP | Enclosure Slot Configuration | Select the slot where the drive is installed | Press Enter to include the drive in the SAF-TE configuration.

Front Panel Controls and Indicators
icon FPC.PDF

Hot Swap Bay Upgrade Kit
icon hot_swap_bay.pdf

How To Daisy Chain Hot Swap Backplanes
The Y-Cable part number AHD3HSBPYCBL allows both SCSI Backplanes to connect together on a single SCSI channel.
For the Intel® RAID Controller SRCU42, the SCSI termination on the RAID controller needs to be disabled
If the Y-cable is connected to the onboard SCSI controllers, then the onboard SCSI termination needs to be disabled.
The Intel® Server Board must have support for the two I2C connectors for both SCSI Backplane. Both I2C cables must be connected to the two I2C connectors on ther server board. Otherwise, the RAID/SCSI controller cannot assign proper SCSI ID to the drives.

ICMB Card Installation
icon icmb_card.pdf

Product Guide
English icon SC5100_PG.PDF
Simplified Chinese icon SC5100_PG_SCHINESE.PDF
Spanish icon SC5100_PG_SPANISH.PDF

Quick Start Guide For SAI2
Side 1 icon AI2_QSG2.PDF
Side 2 icon SAI2_QSG.PDF

Rack Kit Installation Guide
icon RACK_KIT.PDF

Spares/Parts List and Configuration Guide For S845WD1-E
icon CONFIG_GUIDE.PDF

Spares/Parts List and Configuration Guide For SDS2
icon SDS2_CONFIG.PDF

System Status LED
icon FPC.PDF

Compatibility
Tested Rack Cabinets
icon Server_Rack_Cabinet_Compatibility_Guide_2 4.PDF



©Intel Corporation