=============================================================================
    Intel(R) Server Platform S2400LP FRU/SDR Update Release Notes
=============================================================================

INTEL Enterprise Platform & Services Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA

=============================================================================

DATE:   Mar 23, 2012

TO:	    Intel(R) Server Platform S2400LP customers

SUBJECT:    Integrate BMC(R) FRU/SDR update package S2400LP_FRUSDR_1.05 release notes

=============================================================================
                               LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any
patent, copyright or other intellectual property right. Intel Corporation may
have patents or pending patent applications, trademarks, copyrights, or other
intellectual property rights that relate to the presented subject matter.
The furnishing of documents and other materials and information does not
provide any license, express or implied, by estoppel or otherwise, to any
such patents, trademarks, copyrights, or other intellectual property rights.
Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation.

*Other names and brands are the property of their respective owners.

Copyright (c) 2010 - 2012 Intel Corporation.

=============================================================================
                              ABOUT THIS RELEASE
=============================================================================

SDR file version:                  1.05
Baseboard FRU file version:        0.01
Master configuration file version: 1.05

=============================================================================
        SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS
=============================================================================

- This FRU/SDR package has only been tested on S2400LP FAB2 baseboards

- BMC firmware rev 01.04 (or later) MUST be preinstalled prior to installing
  this FRU/SDR package

- BIOS R0044 or later

=============================================================================
                      IMPORTANT INSTALLATION NOTES
=============================================================================

- None

=============================================================================
                         INSTALLATION PROCEDURE
=============================================================================

1. Ensure BMC release 01.04 or later is pre-installed before attempting this
   FRU/SDR update.

2. Copy all of the files in the S2400LP_FRUSDR_0105.zip archive to a USB key,
   hard disk drive or floppy drive.
   All of the files in this zip archive must reside in the same directory.

3. Boot to EFI and then run the following command to display the
   contents of the baseboard FRU device:

    FRUSDR /d FRU

   If device is empty(which is the case for all new FAB1 baseboards) or corrupted, then
   execute the following command to program the empty FRU device:

   For S2400LP:
        FRUSDR /fru S2400LP.fru

4. Now execute the following command to bring up the main FRU/SDR load menu:

    FRUSDR /cfg master.cfg


5. Select the option which is applicable to what you want to do. On a brand
   new baseboard I would highly recommend to run option 3 to program both
   the FRU and SDR. By reprogramming the FRU you will be given the option
   to input data from the keyboard into various chassis, board and product
   areas. Ensure that you select the correct chassis from the chassis
   selection menu otherwise your fan sensors will not be configured
   properly.

6. Once the package has finished its installation, I would highly recommend
   to DC power off the system and cycle AC power.

=============================================================================
                           KNOWN ISSUES/WORKAROUNDS
=============================================================================

- None

=============================================================================
                           FEATURES ADDED
=============================================================================

S2400LP_FRUSDR_0105:
- Update some clamp record 
- Update some stepwise record
- Update DIMM Air Velocity record
- Update Normal Control Value in domain configuration record
- Update  Aggregate Sensor record
- Update System Airflow Formula Record
- Update fans-off record

S2400LP_FRUSDR_0104:
- Update the chassis name in master.cfg file
- Update the temperature of stepwise curve 0x0e and 0x0f. 
- Modify the entity id of "IO Mod Presence" sensor to 0x2c
- Add the P1/P2 DTS Thermal Magin sensor 
- Add a FRU device location record for IO Module

S2400LP_FRUSDR_0103:
- Update sensor #21 entity id from 0ch to 40h

S2400LP_FRUSDR_0102:
- Remove the sensor about DTS(#83h,#84h) refer to config-table 1.6
- Update the FSC refer to config-table 1.6

S2400LP_FRUSDR_0101:
- Add sensor 'Auto Shutdown' (s# B8) 
- Add sensor 'IO Mod Presence' (s# 0E) 
- Add 1600w PSU
- Update all instance ID to 01 for Entity ID 07
- Update s#21 'HSBP TEMP' Entity ID to 0C
- Update Master.cfg file according to CONFIG-FSC.xls(v1.4)


=============================================================================
                           ISSUES FIXED
=============================================================================

S2400LP_FRUSDR_0105:
- None

S2400LP_FRUSDR_0104:
- EPSD100020485:[FW EVL]The test script LinearStepwise_003.tlg running result was failed with FTF312.
- EPSD100020444:[FW EVL]There is not de-assertion events logged for IOM presence in SEL after remove 
                the IO Module from system.

S2400LP_FRUSDR_0103:
- None

S2400LP_FRUSDR_0102:
- None

S2400LP_FRUSDR_0101:
- None



[END OF RELEASE NOTES]