=============================================================================
Intel(R) Server Board S2600GZ/GL Product Family FRU/SDR Update Release Notes
=============================================================================

INTEL Enterprise Platform & Services Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA

=============================================================================

DATE:       August 27, 2012

TO:         Intel(R) Server Board S2600GZ/GL Product Family customers

SUBJECT:    FRU/SDR update package S2600GZ_FRUSDR_106 release notes

=============================================================================
                               LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products. 
No license, express or implied, by estoppel or otherwise, to any intellectual 
property rights is granted by this document. Except as provided in Intel's 
Terms and Conditions of Sale for such products, Intel assumes no liability 
whatsoever, and Intel disclaims any express or implied warranty, relating to 
sale and/or use of Intel products including liability or warranties relating 
to fitness for a particular purpose, merchantability, or infringement of any 
patent, copyright or other intellectual property right. Intel Corporation may 
have patents or pending patent applications, trademarks, copyrights, or other 
intellectual property rights that relate to the presented subject matter.  
The furnishing of documents and other materials and information does not 
provide any license, express or implied, by estoppel or otherwise, to any 
such patents, trademarks, copyrights, or other intellectual property rights.  
Intel products are not intended for use in medical, life saving, or life 
sustaining applications. Intel may make changes to specifications and product 
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation. 

*Other names and brands are the property of their respective owners.

Copyright (c) 2012 Intel Corporation.

=============================================================================
                        ABOUT THIS RELEASE PACKAGE
=============================================================================

SDR file version:                   1.06
Baseboard FRU file version:         0.01
Master configuration file version:  105
FRUSDR loader version:			    11.0 Build 13
FRU/SDR release notes:			    1.00 rev 1.2

SDR data based on system/thermal team SDR spreadsheet rev 6.6

=============================================================================
	     SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS
=============================================================================

- S2600GZ baseboard PBA G11481-102 or higher. Fab -101 boards have a
  non-functional PECI sub-system which results in sensor issues and fan speed
  control causing fans to run at boosted speeds.

- Intel(R) Xeon(R) Processor E5-2600 product family C0 stepping or higher. 


- BIOS x023 or higher installed with flash programmer. This is required to
  get latest ME firmware revision into the BIOS flash device.

- BMC FW 00.14.1421 or later

- Front Panel and Hot-swap backplane FRU data must be available for chassis
  auto-detection to succeed.



=============================================================================
                           KNOWN ISSUES/WORKAROUNDS
=============================================================================
- None


=============================================================================
                           ISSUES FIXED
=============================================================================
S2600GZ_106:
- Revert change to always install Riser Power Good sensors.
- Change to recognize DC Input Power Supplies.

S2600GZ_105:
- EPSD100229678: scaling incorrect for the MTT sensors.
- Removed Riser Temperature Sensors
- Always install Riser Voltage sensor SDRs

S2600GZ_104:
- EPSD100021345: BMC Web UI can't detect 2U 8x2.5 Dual Port HSBP(G51828-101) Temperature.
- Cannot detect temperature sensor on -250 IO Module
- Power Supply Redundancy sensor should be Manual Rearm.
- Updated to FSC Spreadsheet version 6.6

S2600GZ_103:
- Storage Front Panel Temperature sensor reads significantly higher than ambient

S2600GZ_102:
- Changed strings output to screen during SDR update to more accurately describe the system.
- EPSD100227842: [X] BMC disk drive numbering scheme does not match LSI tools (RWC2 and webBIOS)
                 numbering scheme and marketings documentation.
- Fixed an issue with detecting the 2U PCIe Riser for Auxillary cooling.

S2600GZ_101:
- Updated to 6.2 of the Thermal FSC Spreadsheet
- EPSD100226839: FRUSDR update is not recognizing valid FRU on 1U 4 x 3.5" HSBP
- SPS FW Health sensor (ME) SDR had incorrect Sensor Type and Event/Reading Type codes
- Fixed a typo in the DIMM Air Velocity OEM record for R1000 chassis

S2600GZ_100:
- Updated to 6.0 of the Thermal FSC Spreadsheet
- R1000 chassis now has redundant fans
- Fixed issue of not prompting for chassis if HSBP FRU invalid
- EPSD100225798: When the Onboard NIC 1 is disabled in BIOS, the system fans boost and they should not
- EPSD100225754: BMC Web Console is showing sensor Agg Therm Mgn 7 status =deasserted, Health = unknown for 2U Systems


=============================================================================
                           FEATURES ADDED
=============================================================================
S2600GZ_106:
- None

S2600GZ_105:
- None

S2600GZ_104:
- None

S2600GZ_103:
- None

S2600GZ_102:
- None

S2600GZ_101:
- None

S2600GZ_100:
- Some restructuring to detect chassis type in less time



=============================================================================
                             REFERENCE MATERIAL
=============================================================================
Common BMC Firmware EAS
Common Platform BMC FW EPS

[END OF RELEASE NOTES]
