=============================================================================
Intel(R) Server Board S2600KP Product Family and Intel(R) Compute Module HNS2600KP 
Product Family customers FRU/SDR Update Release Notes
=============================================================================

INTEL Enterprise Platform & Services Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA

=============================================================================

DATE:       Aug 22, 2014

TO:         Intel(R) Server Board S2600KP Product Family and Intel(R) Compute Module HNS2600KP 
Product Family customers

SUBJECT:    IBMC(R) FRU/SDR update package S2600KP_FRUSDR_102 release notes

=============================================================================
                               LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any
patent, copyright or other intellectual property right. Intel Corporation may
have patents or pending patent applications, trademarks, copyrights, or other
intellectual property rights that relate to the presented subject matter.
The furnishing of documents and other materials and information does not
provide any license, express or implied, by estoppel or otherwise, to any
such patents, trademarks, copyrights, or other intellectual property rights.
Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation.

*Other names and brands are the property of their respective owners.

Copyright (c) 2014 Intel Corporation.

=============================================================================
                      ABOUT THIS RELEASE PACKAGE
=============================================================================

SDR file version:                    1.02
Baseboard FRU file version:          1.00
Master configuration file version:   102
FRUSDR loader version:               13.0 Build 10

=============================================================================
        SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS
=============================================================================

- S2600KP baseboard PBA -350  or higher.

- Haswell processor C1 stepping or higher.

- BMC firmware 01.05.6802 or later

- BIOS 01.01.0003 or later

- Hot-swap backplane, and Baseboard FRU data must be available
  for chassis auto-detection to succeed.    

=============================================================================
                      IMPORTANT INSTALLATION NOTES
=============================================================================

NOTE: If you updated BIOS and did not clear CMOS Ram, you should do that before
      installing this package.
	  
NOTE: You need to have ME FW 3.05 or later installed for the SSB Temp sensor to work properly.

=============================================================================
                           INSTALLATION PROCEDURE
=============================================================================

1. Ensure reqquired BMC FW and BIOS are pre-installed 
   before attempting this FRU/SDR update.

2. Copy all of the files and directories in the zip archive
   to a USB key, hard disk drive or floppy drive.

3. If the board FRU information has not been previously programmed, then
   default FRU information must be programmed before the update is started.
   This is done with the following command:
   frusdr.efi /FRU S2600KP.fru   (De-pop boards)
   frusdr.efi /FRU S2600KPF.fru  (Infinite band boards)

4. Execute the following script to bring up the main FRU/SDR load menu:

     FRUSDR.nsh

5. Select Option 1 or 3 to do the SDR update.

6. The package should do an auto-config. If it does not, it will print
   an error message indicating why auto-detection failed and then present
   the standard chassis selection menu.

=============================================================================
                           KNOWN ISSUES/WORKAROUNDS
=============================================================================

1. Alpha boards do not have the board FRU information programmed at the factory.
   Before updating the SDR, the Board must have default FRU info programmed
   with the following command:
   frusdr.efi /FRU S2600KP.fru   (De-pop boards)
   frusdr.efi /FRU S2600KPF.fru  (Infinite band boards)

2. This package allows setting of the board Part Number and Serial Number since
   the FRU data may not be pre-programmed at the factory.

=============================================================================
                           ISSUES FIXED
=============================================================================
1.02:
- None.

1.01:
- None

1.00:
- EPSD100243001: Remove obsolete sensor 0x69 from SDR.
- N/A: Add LAN leash sensor in 2U4N chassis.

0.12:
- EPSD100242928: BB +3.3V Vbat has incorrect assertion and deassertion mask values.
- EPSD100243001: Remove obsolete sensor 0x69 from SDR.
- N/A: Modified OEM for some SDRs.

0.11:
- EPSD100242743: [SLV_KNP]DCM console cannot add managed entity.

0.10:
- EPSD100025886: [KNP-FW FTF]FTF test script to do a basic function test of Fan Speed Control Test Fail.
- EPSD100026638: "SDR auto-update failed" is displayed during FRU/SDR updating.

0.09:
- EPSD100026490: No AutoCfg Status failure logged in the SEL after update invalid HSBP FRU then DC cycle the SUT to trigger an auto-config cycle.
- EPSD100026428: There are some unexpected PSU SELs after pull out the PSU.
- EPSD100026303: "IO module" can't be detected in "System information"-->"FRU Information" by EWS.
- EPSD100026512: Unnecessary "Auto Shutdown" assert/desserted event logs were recorded after the system Auto Shutdown.
- N/A: Change SDR type 1 to 2 of "PSx Fanx Fail" sensor.

0.08:
- EPSD100241278: No find sensor name which is related with PS1 and "Pwr Unit Redund"  in Sensor 
Readings page on EWS
- EPSD100026124: [KNP-CDAD]There is critical temperature log in BMC even using 8G C0 DIMM with 
BMC0.20, SDR0.06.
- N/A: Change sensor name string "BB IB Temp" to "BB REAR Temp".
- N/A: Change MTT CPU1 and MTT CPU2 sensor maximum reading from 00 to FF.

0.07:
- EPSD100240923: After use the heat gun to raise sensor (BB Inlet temp) to upper critical value, all 
fans cant boost
- EPSD100026060: [KNP-FW]No "AUTO Shutdown" deasserted event in SEL after "AUTO Shutdown" 
sensor status changed to "deasserted".
- N/A: Modified Minimum Performance Profile value for H2300KP and H2200KP system.
 
0.06:
- EPSD100240533: Sensor name "P2 Status" cant be shown  in SEL entry after AC cycle
- EPSD100240367: Clone of: BMC should not restart after FRUSDR Update is done with legacy 
method (BMC should just run init agent)
- EPSD100240373: OFUV13.8: BMC will restart using OFU to update FRUSDR by non auto-config 
mode
- N/A: Detect FRU device by probe FRU ID.

0.05:
- EPSD100239853: cmd "frusdr -sdr S2600KP.sdr" failed to update when sdr file from 0.04 package.
- EPSD100239264: Power Supply Single in slot 2 has no sensor listed in FRUSDR or EWS.
- EPSD100239714: Spelling error in FRUSDR utility output.
- EPSD100025340: The fan duty of system will change to less than 40% when updated the 
S2600KP_FRUSDR_002 then system will sometimes trigger OTP before access OS/efi.
- EPSD100024623: The speed of system fans is always in hight speed. (0x64 = 100%)
- EPSD100025424: [KNP-FW]The rotational speed of the fan is lower than the threshold of the low, 
critical fan speed.(Reproduce rate : 50%)
- EPSD100240327: KNP HSBP1 Temp sensor should be named as HSBP PSOC or PSOC Temp
=============================================================================
                           FEATURES ADDED
=============================================================================
1.02:
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 1.1.xlsm.

1.01:
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 1.0.xlsm.

1.00:
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 0.9.xlsm.

0.12
- None

0.11:
- New version of FRUSDR.efi utility (ver 13 build 10).

0.10:
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 0.8.xlsm. 
- New version of FRUSDR.efi utility (ver 13 build 9).

0.09:
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 0.7.xlsm. 

0.08:
- New version of FRUSDR.efi utility (ver 13 build 8).

0.07:
- Modified the 'SmaRT-CLST Stat' SDR.
- Removed Romley HSBP support.

0.06:
- New version of FRUSDR.efi utility (ver 13 build 7).
- New FRU file support for infinite band board.
- N/A: Modified OEM for some SDRs.

0.05:
- New version of FRUSDR.efi utility (ver 13 build 6).
- Modified/Added the SDRs as per BMC Firmware EPS v1.01.docx.
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 0.5.xlsm.
- Some tag name added for Auto Detect in the Master.cfg file.

=============================================================================
                             REFERENCE MATERIAL
=============================================================================
FSC Config Sheet Rev 1.1.xlsm datasheet
BMC Firmware EPS v1.04.docx
HWFF-G chassis Auto-detection V01.vsd
[END OF RELEASE NOTES]
