Intel® Pentium Pro
The products you are looking for are no longer manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future content updates or software updates to support new operating systems or improve compatibility with third party devices and software products. THESE PRODUCT SUPPORT DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "TERMS OF USE" INFORMATION. Information on currently available Intel products is available at www.intel.com and/or developer.intel.com

General Information
  Datasheets
    Written for the experienced design engineer, this databook discusses the technical specifications of the Pentium® Pro family of processors ranging from 150 Mhz to 200 Mhz. Electrical, thermal and mechanical data are included in this manual as well as component operation information. Information on design and debug tools, the GTL+ standard and OverDrive(R) processor specifications are also included in this volume. The Pentium Pro processor may contain design defects or errors known as errata. Current characterized errata are available on request. For the latest Specification Update containing this information, contact the Intel Literature Center at 800-548-4725 in the U.S and ask for the Pentium Pro Processor Specification Update (Order Number 242689). In other geographies, please contact your local sales office.

    Pentium® Pro Processor at 150 MHz, 166 MHz, 180 MHz and 200 MHz
    File Name: 24269001.pdf Size: 3,191,996 bytes

    The Pentium® Pro processor with 1 MB L2 cache is a multichip module targeted for use in high-end 4-way multiprocessor capable server systems. The component package contains an Intel Pentium Pro processor core, and 1 MB of L2 cache. The 1 MB cache is built using two of the 512 KB SRAM die found in the 512 KB version of the Pentium Pro processor. While the 512 K version uses a conventional ceramic package, the Pentium Pro processor with 1 MB L2 cache integrates the three die in a plastic package with an aluminum heat spreader. This 387-pin package is compatible with the current Pentium Pro processor footprint. The Pentium Pro processor with 1 MB L2 cache routes all of the processor's high-speed cache interface bus through balanced nets on a thin film interconnect substrate to the two L2 SRAMs. This allows for internal component operation speeds of 200 MHz between the Pentium Pro processor and the L2 cache die.

    Pentium® Pro Processor with 1 MB L2 Cache at 200 MHz
    File Name: 24357001.pdf Size: 1,055,961 bytes

  Thermal Management
    This document is written for professional system integrators building PCs from industry accepted motherboards, chassis, and peripherals. It summarizes thermal management information needed to successfully integrate Pentium® Pro processor based PCs. It is assumed that the reader has a general knowledge of and experience with PC operation, integration, and thermal management. The information in this document applies to PCs assembled using Boxed Pentium Pro processors. The term "Boxed Pentium Pro processors" refers to processors packaged for use by system integrators.

    Systems using Pentium Pro processors all require thermal management. The goal of thermal management is to keep the processor at or below 85°C case temperature when the system is in it's warmest user environment. Boxed Pentium Pro processors are shipped with a high-quality fan heatsink, thermal grease, and a clip. It is the responsibility of the system integrator to properly install the fan heatsink and ensure adequate airflow for the processor. System integrators must ensure airflow through the system to allow the fan heatsink to do its job. Proper attention to airflow when selecting subassemblies and building PCs is important for reliable system operation.

    System Airflow

    System airflow is determined by chassis design, size and location of chassis intake and exhaust vents, power supply fan capacity and venting, location of the processor socket, and placement of add-in cards and cables. Two basic PC form factors are used by integrators: the Baby AT form factor, and the more recent ATX form factor.

    In systems using the Baby AT form factor, airflow is usually from front to back. Air enters the chassis from vents at the front, is drawn through the chassis by the power supply fan, and is exhausted through the back of the chassis. The processor socket is typically located near the front of the chassis, in the path of this front-to-back airflow.

    The ATX form factor is a recent innovation. The ATX form factor simplifies assembly and upgrading of PCs, while improving the consistency of airflow to the processor. Airflow in ATX chassis usually flows from the back of the chassis, directly across the processor, and out of the vents in the front, side, and rear of the chassis. ATX power supplies draw in system air rather than venting out system air. The processor socket is located close to the power supply, in the path of airflow coming from the power supply. Figure 1 shows airflow through a typical ATX chassis.

    Figure 1. Airflow through an ATX tower system

    Airflow guidelines

    The following is a list of guidelines to be used when integrating a system. Specific mention of Baby AT and ATX components is made where necessary.

    - Provide sufficient air vents: Systems must have adequate air vents in addition to a fan. Chassis vents must be fully functional. Integrators should be careful not to select chassis that contain cosmetic vents only. Proper location of vents results in a good stream of air flowing over the processor. For Baby AT systems, intake vents on the front of the chassis allow air to flow over the processor. For ATX systems, exhaust vents in the chassis allow air already forced over the processor (by the power supply) to flow out of the chassis.
    - Power supply air flow direction: It is important to choose a power supply with a fan that moves air in the proper direction. For Baby AT systems, the power supply fan acts as an exhaust fan, venting system air outside the chassis. For ATX systems, the power supply acts as an intake fan, drawing air into the system.
    - Power supply fan strength: For some chassis that are running too warm, changing to a power supply with a stronger fan can greatly improve airflow.
    - System fan--should it be used? Some chassis may contain a system fan to assist airflow. A system fan is typically used with passive heatsinks. With fan heatsinks, however, a system fan can have mixed results. Thermal testing both with a system fan and without the fan will reveal which configuration is best for a specific chassis. When a fan heatsink is used on the processor, changing to a power supply with a stronger fan is usually a better choice than adding a system fan.
    - System fan airflow direction: When using a system fan, ensure that it moves air in the same direction as the overall system airflow. For example, a system fan in a Baby AT system should act as an intake fan, pulling in additional air from the front chassis vents. A system fan in an ATX system should act as an exhaust fan, moving additional system air out through the exhaust vents in the chassis.
    - Protect against hot spots: A system may have strong air flow, but still contain "hot spots." Hot spots are areas within the chassis that are significantly warmer than the rest of the chassis air. Such areas can be created by improper positioning of a system fan, adapter cards, cables, or chassis brackets and subassemblies blocking the airflow within the system. To avoid hot spots, remember that hot air rises, and place exhaust fans accordingly, re-position full-length adapter cards, or use half-length cards, re-route and tie-back cables, and ensure space around and over the processor.

    Thermal Testing

    Thermal testing is highly recommended when choosing a new supplier for motherboards or chassis, or when starting to use new products. Thermal testing can show integrators if a specific chassis-power supply-motherboard configuration provides adequate airflow for the Boxed Pentium Pro processors and their future OverDrive® processors.

    An easy method for performing thermal testing is to attach a thermal indicator label to the bottom of the processor before placing the processor in its socket. The label indicates the highest temperature range the processor reached during operation. This temperature reading can be used, together with a room temperature reading, in a calculation to verify the maximum operating temperature of the system.

    Thermal Indicator Labels can be purchased from:

    American Thermal Instruments, Inc.
    P.O. Box 353,
    Dayton OH 45401, U.S.A.
    Phone (800) 648-6339 or fax (937) 252-6509
    Label: Model I-602

    In addition to the thermal labels, the equipment required for testing includes:

    - A thermometer (to measure room temperature)
    - The DOS EDIT program on a system disk (disk boots to DOS.) DOS EDIT must be from DOS 5.xx, or 6.xx, not from another operating system.

    The procedure for thermal testing is as follows:

    If the system is powered on at the start of the test, wait at least 15 minutes after turning off power and removing the chassis cover.

    1. To ensure maximum power consumption during the tests, you must disable the system's automatic powerdown modes or "green features." These features are controlled either within the system BIOS or by operating system drivers.
    2. Place a thermal label on the bottom of the processor package over the processor die. The processor die is located at the end of the die lid surrounded by the extra pins. The label covers most of the die lid. Open the chassis, install the Boxed Pentium Pro processor, and connect the fan heatsink power cable.

       Figure 2. Thermal indicator label on bottom of Pentium Pro processor

    3. If you disconnected cables or removed boards to install the processor, replace them now. Quickly power up and power down the system to make sure the fan rotates. Check the fan heatsink power connections if the fan is not rotating.
    4. Attach the chassis cover and replace cover screws.
    5. Power up the PC and boot to DOS. Use the DOS system disk if needed.
    6. Invoke DOS EDIT and select the FILE pull-down menu (ALT + F). Leaving the menu pulled down constantly exercises the processor, causing the processor to rapidly heat up.
    7. Allow the menu to remain pulled down for 1 hour. This allows the entire system to heat up and stabilize. Record the room temperature at the end of the 1 hour period.
    8. After recording the room temperature, power the system down. Remove the chassis cover.

       Allow the system to cool at least 15 minutes.

    9. Remove the processor and turn it over.
    10. Record the thermal label's lowest temperature white number. Remove the label when testing is complete. Labels cannot be used again. Verify the maximum operating temperature for the system.

    Verifying the System's Maximum Operating Temperature

    This section explains how to determine whether a system meets the maximum operating temperature intended while keeping the processor within its maximum operating range. The result of this process shows whether or not system airflow needs to be improved or the system maximum operating temperature needs to be revised to produce a more reliable system.

    The first step is to select a maximum operating temperature for the system. A common value for systems where air conditioning is not available is 40°C. A common value for systems where air conditioning is available is 35°C. Choose a value that is right for your customer. Write this value on line A below.

    Write the room temperature recorded at the end of the test on line B below. Subtract line B from line A and write the result on line C. This difference compensates for the fact that the test was likely conducted in a room that is cooler than the system's maximum operating temperature. A table at the end of this document shows conversion between Fahrenheit and Celsius scales.

    A. _ _ _ _ _ (Maximum operating temperature, typically 35°C or 40°C) B. -_________ room temperature °C C. _ _ _ _ _

    Write the temperature recorded from the indicator label (lowest temperature white number) on line D below. Copy the number from line C to line E below. Add line D and line E and write the sum on line F. This number represents the highest temperature for the bottom of the processor when the system is used at its specified maximum operating temperature. There is one more step.

    Since the top of the processor gets warmer than the bottom, we need to take that difference into account. Add 5°C to the value on line F and write the sum on line G.

    D. _ _ _ _ _ temperature from label E. +_________ F. _ _ _ _ _ +__5°C ___ top to bottom difference G. _ _ _ _ _

    The value on line G represents the case temperature of the processor when the system is operated in its warmest environment. Processors should not be run at temperatures higher their maximum specified operating temperature or failures may occur. If line G reveals that the processor reached a temperature higher than its maximum operating range, then action is required. Either the system airflow must be significantly improved, or the system's maximum operating temperature must be revised.

    The specification for the Pentium Pro processor states the maximum case temperature to be 85°C. Therefore, if the number on line G is less than or equal to 85°C, the system will keep the Pentium Pro processor within specification, even if the system is operated in its warmest environment. Note that future OverDrive processors that can be installed in the socket have the same thermal characteristics as the Pentium Pro processor. No additional headroom is needed to support these OverDrive processors.

    The following table is provided to help convert between Fahrenheit and Celsius scales.

    °F | °C |  | °F | °C
    59 | 15 |  | 127.4 | 53
    61 | 16 |  | 129.2 | 54
    62.5 | 17 |  | 131 | 55
    64.5 | 18 |  | 132.8 | 56
    66 | 19 |  | 134.6 | 57
    68 | 20 |  | 136.4 | 58
    70 | 21 |  | 138.2 | 59
    71.5 | 22 | typical office room temperature | 140 | 60
    73.5 | 23 |  | 141.8 | 61
    75 | 24 |  | 143.6 | 62
    77 | 25 |  | 145.4 | 63
    79 | 26 |  | 147.2 | 64
    80.5 | 27 |  | 149 | 65
    82.5 | 28 |  | 150.8 | 66
    84 | 29 |  | 152.6 | 67
    86 | 30 |  | 154.4 | 68
    88 | 31 |  | 156.2 | 69
    89.5 | 32 |  | 158 | 70
    91.5 | 33 |  | 159.8 | 71
    93 | 34 |  | 161.6 | 72
    95 | 35 | Max. Air temperature typical for an air-conditioned environment. | 163.4 | 73
    97 | 36 |  | 165.2 | 74
    98.5 | 37 |  | 167 | 75
    100.5 | 38 |  | 168.8 | 76
    102 | 39 |  | 170.6 | 77
    104 | 40 | Max. Air temperature typical for a non air-conditioned environment. | 172.4 | 78
    105.8 | 41 |  | 174.2 | 79
    107.6 | 42 |  | 176 | 80
    109.4 | 43 |  | 177.8 | 81
    111.2 | 44 |  | 179.6 | 82
    113 | 45 |  | 181.4 | 83
    114.8 | 46 |  | 183.2 | 84
    116.6 | 47 |  | 185 | 85
    118.4 | 48 |  | 186.8 | 86
    120.2 | 49 |  | 188.6 | 87
    122 | 50 |  | 190.4 | 88
    123.8 | 51 |  | 192.2 | 89
    125.6 | 52 |  | 194 | 90

  Intel® microprocessor export compliance metrics

    Intel Corporation
    2200 Mission College Blvd.
    P.O. Box 58119
    Santa Clara, CA 95052-8119
    USA

    Global Trade Department
    e-mail inquiries to: ctp.determinations@intel.com

    Following are the Gigaflops (GFLOPS), Composite Theoretical Performance (CTP), and Adjusted Peak Performance (APP) values for Intel’s 32-bit and 64-bit processors. All Intel® 8-bit and 16-bit processors and microcontrollers with a clock speed exceeding 25 MHz are 3A991, with the exception of those encapsulated in military packages that have been tested to the Mil-883C temperature specifications. All Intel 8-bit and 16-bit processors and microcontrollers with a clock speed of 25 MHz or less are EAR99.

    On November 5, 2007, the United States Department of Commerce’s Bureau of Industry and Security (BIS) published amendments to the Export Administration Regulations 15 CFR, which resulted in the inclusion of the December 2006 Wassenaar Arrangement Plenary Agreement Implementation.

    The amendments introduced a new metric, Gigaflops (GFLOPS), to measure processor performance for export purposes. BIS no longer requires exporters to determine the CTP. However, CTP values will still be provided for those customers located in countries where the CTP is still required as a measurement of processor performance for export compliance purposes.

    CTP calculations are based upon a modified formula resulting from Wassenaar negotiations on December 21, 1993, and published in the United States Department of Commerce Export Administration Regulations 15 CFR 774 (Advisory Note 4 for Category 4), and are stated in Millions of Theoretical Operations Per Second (MTOPS).

    APP calculations are based on the formula published in the United States Department of Commerce Export Administration Regulations 71 CFR 20876, and are stated in Weighted Teraflops (WT).

    All GFLOPS, CTP and APP calculations contained herein were based on specifications taken from Intel datasheets and are subject to change without notice. Intel makes no representation or warranty as to the accuracy or reliability of such specifications. THESE CALCULATIONS ARE PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. Intel disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in these calculations. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein.

    Pentium® Pro processors

    Processor Number | Clock Speed | CTP in MTOPS | GFLOPS | APP in WT
    |  |  |  | 1 Way | 2 Way | 4 Way
    N/A | 200 MHz | 233.334 | 0.2 | 0.00006 | 0.00012 | 0.00024
    N/A | 180 MHz | 210.001 | 0.18 | 5.4E-05 | 0.00011 | 0.00022
    N/A | 166 MHz | 194.445 | 0.17 | 5E-05 | 1E-04 | 0.0002
    N/A | 150 MHz | 175.001 | 0.15 | 4.5E-05 | 0.00009 | 0.00018
    N/A | 133 MHz | 155.556 | 0.13 | 4E-05 | 8E-05 | 0.00016
    N/A | 120 MHz | 140 | 0.12 | 3.6E-05 | 7.2E-05 | 0.00014

  Specifications
    Intel® Pentium® Pro Specifications

Software and Drivers
  Download (Bootable Version) - Intel® Processor Frequency ID Utility

    Version 7.2

    The bootable version of the Intel® Processor Frequency ID Utility is available in .exe format. This download does not work in DOS-emulation windows, as found in operating systems such as Linux*. Since this version is bootable, it does not depend on any specific operating system (OS independent).

    See the Installation Guide for detailed instructions on how to use this utility.

    Which Utility Should I Use?
    For Intel® Pentium® III processors, and processors manufactured before the Intel® Pentium® III processor, use the Intel® Processor Frequency ID Utility.

  Download (Windows* Version) - Intel® Processor Frequency Utility

    Version 7.2

    The utility is available for download in a self-installing .msi file format.

    - Supported Processors
    - Supported Operating Systems
    Windows XP*, and Windows* 2000
    You must have system administrative rights for successful installation on Windows XP* and Windows 2000*.

    Note | There are two processor identification utilities used to identify Intel® processors. The Intel® Processor Identification Utility is the newest identification utility. Before downloading either utility, review the supported processors list to see the processors supported by each utility.

  Frequency Test Tab
    The Frequency Test Tab can provide information regarding the operating status of the tested processor or system bus. It will report:
    - Proper Intel® processor brand identification
    - Processor and system bus expected frequencies
    - Processor and system bus reported frequencies
    - Accompanying this information is a message informing the user whether the processor is operating at its expected frequency
    - Which processor was tested in a multiprocessor system, and total number of processors (Windows* XP, and Windows* 2000 only)
    Please note that this tab is only available on supported processors.
  Intel® Processor Frequency ID Utility for Windows*

    The CPUID Utility for Windows* is incorporated into the Intel® Processor Frequency ID Utility.

    Use the CPUID Data Screen of the utility to identify Pentium® processors and higher.

  Supported operating systems for the Intel® Processor Frequency ID Utility
    Operating System
    - Windows 98* SE
    - Windows 2000* Professional, Server, Advanced Server
    - Windows Me*
    - Windows XP*
    The bootable version is operating system independent. After you create the bootable floppy, you can take it to any platform, reboot, and check on the status of your Intel® processor.

    Note | Windows 95*, Windows 98, Windows NT* 3.51, and Windows NT 4.0 are no longer supported. Use bootable version of the Intel Processor Frequency ID Utility for systems which have Windows 95 or Windows NT 3.51 installed.

Technical Notes
  Fact Sheet

    Clock Speed(MHz) | 150 | 166 | 180 | 200*
    Bus Speed (MHz) | 60 | 66 | 60 | 66
    L2 Cache | 256K | 512K | 256K | 256K
    Manufacturing Process | 0.6 micron | 0.35 micron | 0.35 micron | 0.35 micron
    Die Size | 691 mils/side | 552 mils/side | 552 mils/side | 552 mils/side
    CPU Voltage | 3.1V | 3.3V | 3.3V | 3.3V
    Max. Current | 9.9 | 9.4 | 10.1 | 11.2
    Power (watts) | 23.2 typical | 29.2 max. | 23.4 typical | 29.4 max. | 25.3 typical | 31.7 max. | 28.1 typical | 35.0 max.
    Performance | 276.3 SPECint92 220.0 SPECfp92 6.08 SPECint95 5.42 SPECfp95 | 327.1 SPECint92 261.3 SPECfp92 7.11 SPECint95 6.21 SPECfp95 | 327.4 SPECint92 254.6 SPECfp92 7.29 SPECint95 6.10 SPECfp95 | 366.0 SPECint92 283.2 SPEC fp92 8.09 SPECint95 6.70 SPECfp95
    Production Quantity | Q4 '95 | Q1 '96 | Q4 '95 | Q4 '95

    Other data, for all Pentium® Pro processors:

    Sampling: Internal Bus Width: External bus Width: Virtual Addr Space: Physical Addr Space: Math Co-Processor Support: Dynamic Execution: SuperScalar: CPU Transistors: Package Size: Package Type: L1 Cache: First-Level Cache Controller: Second-Level Cache Controller: | Began Q1 '95 300 Bits 64 bits front side, 64Bits to L2 cache 64 Terabytes 64 Gigabytes Built-in Yes Yes ~ 5.5 Million 2.46 inches by 2.66 inches Dual-Cavity PGA with 387 pins 8K I + 8K D Built-in Built-in

    L2 Cache details:

    Cache size Die size Process: Transistors: Speed: Availability: | 256K 671x467 Mils(202 sq. mm) 0.6 micron 15.5 Million Core speed at Intro | 512K 580x650 Mils (242 sq. mm) 0.35 micron 31 Million Core speed H196

    *200-Mhz Pentium Pro processor with 512K cache in production quantities Q296

  These products are no longer supported via phone, e-mail, or chat

    The following older processor families are no longer supported through interactive support such as phone, e-mail, or chat.

    Intel will maintain information for these processors on our web site.

    Processor | End of interactive support (EOIS) | Additional description
    Mobile Intel® Pentium® 4 Processors - M | November 8th, 2008 | All
    Intel® Processor Frequency ID Utility | November 8th, 2008 | All
    Intel® Pentium® Processors Extreme Edition | November 8th, 2008 | All
    Intel® Pentium® D Processors | November 8th, 2008 | All
    Intel® Pentium® 4 Processors Extreme Edition | November 8th, 2008 | All
    Intel® Pentium® 4 Processors Extreme Edition supporting HT Technology | November 8th, 2008 | All
    Intel® Pentium® 4 Processors | November 8th, 2008 | All
    Intel® Celeron® D Processors | November 8th, 2008 | All
    Intel® Celeron® Processors | November 8th, 2008 | All 478-pin package
    December 1st, 2004 | All FCPGA & FCPGA2 packages
    December 1st, 2004 | All 370-pin package
    June 14th, 2002 | All PPGA & SEPP packages
    Still supported | [E3000, E1000 & 400 Series are still supported]
    Intel® Pentium® III Xeon® Processors | December 1st, 2004 | All
    Intel® Pentium® III Processors | December 1st, 2004 | All
    Mobile Intel® Pentium® III Processors | December 1st, 2004 | All
    Intel® Pentium® II Xeon® Processors | June 14th, 2002 | All
    Intel® Pentium® II Processors | June 14th, 2002 | All
    Mobile Intel® Pentium® II Processors | December 1st, 2004 | All
    Intel® Pentium® Pro Processors | October 17th, 2000 | All
    Intel® Pentium® Processors with MMX™ Technology | October 17th, 2000 | All
    Intel® Pentium® Processors | October 17th, 2000 | All
    Intel® Pentium® Mobile Processors | October 17th, 2000 | All
    Intel® OverDrive® Processors | October 17th, 2000 | All
    Intel486™ Processors | December 1st, 2004 | All
    Intel386™ Processors | December 1st, 2004 | All