================================================================================
Intel(R) Xeon(R) Processor-Based Server BIOS Development
================================================================================
INTEL Product Collaboration and Systems Division
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA
================================================================================
DATE    : July 01, 2015
TO      : Multi-Core Intel(R) Xeon(R) Processor-Based Server Platform customers
SUBJECT : BIOS Release notes for version R03.02.0003
================================================================================
                           LEGAL INFORMATION
================================================================================

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO 
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL 
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS 
AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER 
AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE 
OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A 
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR 
OTHER INTELLECTUAL PROPERTY RIGHT. 

A "Mission Critical Application" is any application in which failure of the Intel 
Product could result, directly or indirectly, in personal injury or death. SHOULD 
YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, 
YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND 
AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST 
ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT 
OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR 
DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT 
INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF 
THE INTEL PRODUCT OR ANY OF ITS PARTS. 

Intel may make changes to specifications and product descriptions at any time, 
without notice. Designers must not rely on the absence or characteristics of any 
features or instructions marked "reserved" or "undefined". Intel reserves these for 
future definition and shall have no responsibility whatsoever for conflicts or 
incompatibilities arising from future changes to them. The information here is 
subject to change without notice. Do not finalize a design with this information. 

The products described in this document may contain design defects or errors known 
as errata which may cause the product to deviate from published specifications. 
Current characterized errata are available on request. 

Contact your local Intel sales office or your distributor to obtain the latest 
specifications and before placing your product order. 

Copies of documents which have an order number and are referenced in this document, 
or other Intel literature, may be obtained by calling 1-800-548-4725, 
or go to: http://www.intel.com/design/literature.htm

Intel is a registered trademark of Intel Corporation. 

*Other names and brands are the property of their respective owners.

Copyright (C) 2015 Intel Corporation.

================================================================================
                              ABOUT THIS RELEASE
================================================================================
Build Version : S1200RP.86B.03.02.0003
Build Dater   : July 01, 2015

================================================================================
                           BIOS COMPONENTS/CONTENTS
================================================================================
Processors supported: 
Intel(R) Xeon processor E3-1200 V3 series
Intel(R) Xeon processor E3-1200 V4 series

Microcode update versions:
 
Intel(R) Xeon processor E3-1200 V3 series C0 stepping: 0x0000001D  CPUID = 0x306C3   
Intel(R) Xeon processor E3-1200 V4 series G0 stepping: 0x0000000D  CPUID = 0x40671 

On-Board Component Option ROM Versions:
Integrated Matrox VGA               : VBE BIOS V3.8 SQ
1G PXE Option ROM                   : Intel(R) Boot Agent XE v1.5.53.1
10G PXE Option ROM                  : Intel(R) Boot Agent XE v2.3.24.1
82599 10G PXE Option ROM            : Intel(R) FCoE Boot v1.8.17
iSCSI Option ROM                    : Intel(R) iSCSI Remote Boot version 3.0.43
NIC UEFI Driver                     : E6327X3.EFI
SATA RAID Option ROM - RSTe         : 4.1.0.1026
UEFI SATA RAID Option ROM - RSTe    : 4.1.0.1026
ESRT II FOR SATA                    : A.14.02121826
Legacy Processor Video              : 5.5.1038
UEFI Processor Video driver         : 5.5.1032 

Reference Code Version              : 2.7.1
Memory Reference Code Version       : 1.8.0.3
v4 Memory Reference Code Version    : 2.7.1.0
Management Engine Firmware Version  : 03.00.07.024
ACM                                 : BDW v1.2

================================================================================
                       SYSTEM FIRMWARE REQUIREMENTS
================================================================================
BIOS Update Utility: 
  UEFI iFlash32 V12.0 build08 
  
  Product   Fab Version	  BMC	   FRUSDR    
S1200V3RPL  G62251-302	  1.03	     1.03
S1200V3RPS  G62252-302    1.03	     1.03
	    G62252-305    1.03	     1.03
S1200V3RPO  G62253-302    1.03	     1.03
	    G62253-305    1.03	     1.03
S1200V3RPM  G62254-302    1.03	     1.03

================================================================================
                           INSTALLATION NOTES
================================================================================

WARNING:  It is very important to follow these instructions as they are written.
Failure to update using the proper procedure may cause damage to your system.

A:UEFI iFlash32 
   1.  Boot the system to EFI Shell
   2.  Copy IFlash32.efi and BIOS.CAP file to a USB Flash Drive
       ( Do not use the *Rec.CAP file as it will clear the NVRAM)
   3.  Map the respective storage device in the system with the command
	   Shell> map -r
   4.  Change the Shell to mapped device file system
	   Example: Shell> fs0: (or fs1:)
   5.  Run the IFlash32 utility at the prompt
	   fs0:\> IFlash32 [File Name] /u /ni
   6.  Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9>
       and save <F10> or After the BIOS update and before rebooting, 
       run: fS0:> Iflash32 -rd
   7.  Reboot the system

B:Backup BIOS update instructions
   1.  Boot the system to EFI Shell
   2.  Copy IFlash32.efi and BIOS .CAP file to a USB Flash Drive
       ( Do not use the *Rec.CAP file as it will clear NVRAM)
   3.  Map the respective storage device in system with the command
	   Shell> map -r
   4.  Change the Shell to mapped device file system
	   Example: Shell> fs0: (or fs1:)
   5.  Run the IFlash32 utility on the prompt
	   fs0:\> IFlash32 [File Name] /u /ni UpdateBackupBios
   6.  It will update primary BIOS with processed capsule, and the backup BIOS 
       update will be completed in next normal boot.
   7.  Reboot the system.
================================================================================
                        BIOS RECOVERY INSTRUCTIONS
================================================================================
The Recovery process can be initiated by setting the recovery jumper. (called 
BIOS Recovery Boot Jumper)
 
A BIOS recovery can be accomplished from the backup BIOS region or USB Mass Storage device. 
Please note that recovery from USB floppy is not supported on this platform. 
 
The recovery media must contain the following files under the root directory:
   2.  UEFI iFlash32 (including IFlash32.efi and ipmi.efi )
   3.  *Rec.CAP
   4.  Startup.nsh (update accordingly to use proper *Rec.CAP file)
 
BIOS starts the recovery process by first loading and booting to the recovery image from the 
backup BIOS region.

This process takes place before any video or console is available. Once the system boots 
to recovery image, it will boot automatically into EFI Shell to invoke the Startup.nsh 
script and start the flash update application (IFlash32.efi). IFlash32.efi requires the 
supporting BIOS Capsule image file (*Rec.CAP). After the update is complete, there will 
be a message displayed stating that the "BIOS has been updated successfully" indicating 
the recovery process is finished. The User should then switch the recovery jumper back to
normal operation and restart the system by performing a power cycle.
 
The following steps demonstrate this recovery process:
   1.  Power OFF the system.
   2.  Insert recovery media.(Optional if the backup BIOS region works)
   3.  Switch the recovery jumper. Details regarding the jumper ID and location
       can be obtained from the Product Board TPS.
   4.  Power ON the system.
   5.  The BIOS POST screen will appear displaying the progress and system automatically 
       boots to the EFI SHELL.
   6.  Startup.nsh file executes, and initiates the flash update (IFlash32.efi)
       with new capsule file (*Rec.CAP). The regular IFlash message will be displayed at
       the end of the process, once the flash update succeeds.
   7.  Power OFF the system, and revert the recovery jumper position to "normal".
   8.  Power ON the system. 
   9.  Do *NOT* interrupt the BIOS POST during the first boot.
================================================================================
                            KNOWN ISSUES/WORKAROUNDS
================================================================================
- If you want to install Linux* SUSE* 11 SP2 or boot to a pre-installed Linux* SUSE* 11 SP2 OS, 
- R02.01.0002 and later version need use command "iflash32 -u RB_R02.0x.xxxxRec.cap UpdateBackupBios -ni" 
to upgrade from R01.04.0002 and early version. Similarly, R01.04.0002 and early version need use command "iflash32 -u RB_R01.0x.xxxxRec.cap UpdateBackupBios -ni" to downgrade from R02.01.0002 and later version.
- As security requirement, R03.01.0001 reversion doesn't support capsule downgrade in normal mode.
- R03.01.0002 is the first BIOS that adds support for Intel(R) Xeon processor E3-1200 V4 series. If you
   are upgrading from R02.02.0004 or earlier BIOS versions,  you will need to use  
   a Intel(R) Xeon processor E3-1200 V3 series processor first to boot to EFI shell and use capsule files to update BIOS to R03.01.0002.
   After flashing with the Intel(R) Xeon processor E3-1200 V3 series processor, you can install
   the Intel(R) Xeon processor E3-1200 V4 series processor and boot.  

================================================================================
                              FIXES AND FEATURES ADDED/REMOVED
================================================================================

================================================================================
                                R03.02.0003
================================================================================
NOTICE:  R03.02.0003 supports the Intel(R) Xeon processor E3-1200 V4 series. If you
   are upgrading from R02.02.0005 or earlier BIOS versions,  you will need to use  
   a Intel(R) Xeon processor E3-1200 V3 series processor first to boot to EFI shell and use capsule files to update BIOS to R03.01.0002.
   After flashing with the Intel(R) Xeon processor E3-1200 V3 series processor, you can install
   the Intel(R) Xeon processor E3-1200 V4 series processor and boot.
  - Added: Microcode update 0x0000000D for CPUID = 0x40671
  - Fixed:  Variable can't be set or deleted in EFI Shell via EFI shell commands-----intermittent issue
  - Fixed:  [BMC_BDW]There're some SMI timeout event logs when run DC cycle
  - Fixed:  Nvidia 06G-P4-2790-KR X16 card hang at 0x15 during POST with BIOS PV RC1

  - Fixed:  The PCIE Oprom Control options are expected to be invisible in UEF
  - Fixed:  L3 cache Associativity of SMBIOS type 7
  - Fixed:  sysinfo_log.txt file does not match with Bios information
  - Fixed:  The SUT hang at 0x0E with CPU QJ6G when 3 wrong password attempt
  - Fixed:  Gen3 card working on Gen2 on LC/RO/RM slot 6 when no other device populated.
  - Fixed:  Hyper -V installation on S1200V3RP system fail on R03.02.0002 while no this issue on R03.02.0001. the issue also happened on Vmware ESXi5.5

================================================================================
                                R03.01.0002
================================================================================
NOTICE: As security requirement, R03.01.0002 and later revision doesn't support capsule downgrade to R02.02.0005 and previous revision in normal mode. It only supports capsule downgrade in Recovery mode.

NOTICE:  R03.01.0002 is the first BIOS that adds support for Intel(R) Xeon processor E3-1200 V4 series. If you are upgrading from R02.02.0005 or earlier BIOS versions,  you will need to use a Intel(R) Xeon processor E3-1200 V3 series processor first to boot to EFI shell and use capsule files to update BIOS to R03.01.0002.
   After flashing with the Intel(R) Xeon processor E3-1200 V3 series processor, you can install
   the Intel(R) Xeon processor E3-1200 V4 series processor and boot.


 -Added: Microcode update 0x0000001D for CPUID = 0x306C3
 -Added: Microcode update 0x0000000B for CPUID = 0x40671

 -Fixed: The SUT halt at 0x0D when the backup bios was updated at POST stage
 -Fixed: The type 4 Processor Upgrade Field vaule is incorrect for LGA1150 
 -Fixed: Cannot log in to BMC Webconsole after set user and password
 -Fixed: Sleep S3 wake up failed with BDW CPU. 
 -Fixed: System hangs at 0x9A with BDW CPU when VT-d is enabled   
 -Fixed: The value of Creator ID/OEM Revision/Creator Revision in FPDT tabl
 -Fixed: System will automatic resume from S1/S3/S5 after S3 wake on LAN.
 -Fixed: The maximum length of password don't match with the length of EPS
 -Fixed: The value at Bit 3 to Bit 7 of Processor Characteristics field
 -Fixed: The value of current usage field when it is populated for each in
 -Fixed: Sometimes the system hang at 0x96 with add-on graphic card.
 -Fixed: SUT will reboot unexpectedly  when run IWVSS  in Win2012R2.
 -Fixed: TBoot test failed 
 -Fixed: There are 16 N/A devices in BIOS USB configuratoin tab after usb controller disable
 
 


================================================================================
                                R02.02.0005
================================================================================
NOTICE: Need to use recovery capsule file to downgrade/upgrade between R02.02.0005 and R02.00.0x31/before version BIOS (Including R01.04.0002 and before). 
  - Fixed: RS25GB008/RS2PI008 RAID cards lost after S3 resume when it plugged into slot4/7.
  - Fixed: The primary display option doesn't show in the MFG mode.
  - Fixed: The "Internal Graphics" option displayed on BIOS Setup in MFG mode with no-graphic CPU.
  - Fixed: NMI activated-system halted when three specific cards plugged into slot 4/6 and SAS_mod slot.
  - Fixed: [x]incorrect message showed on POST that S1200RPL with two SATA ports @ 3Gbps and 4 SATA ports @6Gbps.
  - Fixed: The onboard VGA would display after S3 when on board video was set to disabled in BIOS Setup.
  - Disable ACPI S4 support

================================================================================
                                R02.02.0004
================================================================================
NOTICE: Need to use recovery capsule file to downgrade/upgrade between R02.02.0004 and R02.00.0x31/before version BIOS (Including R01.04.0002 and before). 
  - Integrate intel-lan_OpROMs_v19.3-rev1.

================================================================================
                                R02.02.0003
================================================================================
NOTICE: Need to use recovery capsule file to downgrade/upgrade between R02.02.0003 and R02.00.0x31/before version BIOS (Including R01.04.0002 and before). 
  - Fixed: [x]It shows black screen instead of RAID configure information when system POST if set DP output and ESRTII enable.

================================================================================
                                R02.02.0002
================================================================================
NOTICE: Need to use recovery capsule file to downgrade/upgrade between R02.02.0002 and R02.00.0x31/before version BIOS (Including R01.04.0002 and before). 
  - Fixed: Can't power on SUT when RS2WC080 connect PCIE slot 4 on SE Sku with R02.02.0001.
  - Fixed: The Zepher with Payload Signature should be hidden if the normal OS is booted.
  - Fixed: Rainbow Pass BIOS report the unknown PCIE Error SEL, which not following the Spec.
  - Fixed: It will reboot when shut down in SUSE OS sometimes.
  - Fixed: USB Boot Priority help text description spell error.
  - Fixed: Syscfg v12 build 13: BootOrder will be changed before and after running cmd: syscfg /s file.ini /f /b
  - Fixed: There are four type 9 structures(slot4/5/6/7) in SMBIOS log on RO SKU
  - Fixed: The BMC KVM couldn't work when USB3.0 support was set to enabled

================================================================================
                                R02.02.0001
================================================================================
NOTICE: Need to use recovery capsule file to downgrade/upgrade between R02.02.0001 and R02.00.0x31/before version BIOS (Including R01.04.0002 and before).  
  - Updated: Microcode M32306C3_0000001A 
  - Updated: Enable Processor graphics on Rainbow Pass LC BIOS
  - Fixed: Error message show incorrect which missing severity under setup.
  - Fixed: BIOS flash content can be corrupted by fuzzing SMI 0x22 and 0x23, which will brick the system.
  - Fixed: Sometimes SAS RAID Card ASR6805 512MB can’t be detected when insert in slot6/slot5.
  - Fixed: Compatibility issue between Rainbow Pass and EXPI9301CT(82574L chip) that many PCIe critical error in SEL
  - Fixed: Mass Storage Device  option still exit after  setting USB EP Type Ploicy Setting to Policy 1 and Set "Bulk OUT"," Ctrl"," Bulk IN" Item to enable
  - Fixed: iSCSI 1GbE/10GbE Option ROM turn to NOT gray out after system load default value.
  - Fixed: [x]OLTM/CLTM not available in BIOS of S1200RP
  - Fixed: The USB3.0 mass storage device could be detected in port 4 when Rear USB port 1,4  are seted  to ploicy 1
  - Fixed: USB EP Type Policy setting item can be changed when USB3.0 Support item is not enabled
  - Fixed: No display from on board DP port in windows when EFI optimized mode enabled
  - Fixed: An 'enter password' dialog box is not displayed after the administrator password  has been setted
  - Fixed: After removing cmos battery or clearing CMOS jumper, there are no error message 0012 and 5220
  - Fixed: SMBIOS type 17 Configured Memory Clock Speed shows 0x000
  - Fixed: Device manager will show ME and PCI serical port devices when scaning for hardware changed after resuming from S3
  - Fixed: The option value of memory speed selection in BIOS will be lost after setting its value manually.
  - Fixed: SOL terminal will be no response in BIOS USB configuratoin tab after usb controller disabled
  - Fixed: Not prompted for a password to get into the EFI environment after Admin password is installed and EFI shell is the first boot order
  - Fixed: BIOS flash content can be corrupted 
================================================================================
                               R02.01.0004
================================================================================
NOTICE:  If BIOS Rev 02.01.0002 is not pre-installed then please install that release first prior to installing this release.
         The BIOS Rev 02.01.0002 contains a critical update which must be present before installing this release.

- This version enhances the protection of certain UEFI variables as described in 
	Intel Security Advisory INTEL-SA-00038
================================================================================
                                R02.01.0002
================================================================================
NOTICE:  Need to use recovery capsule file to downgrade/upgrade between R02.01.0002 
         and any earlier BIOS versions (incluing R01.04.0002).
         We recommend the customer to update Backup BIOS at same time and keep 
         Backup BIOS same as normal BIOS for BIOS R02.01.0002.
         # ¡°iflash32 ¨Cu R02.01.0002Rec.cap UpdateBackupBios -ni¡±
         After the BIOS receives request from utility, the backup BIOS update will 
         be completed in next normal boot. It will show message 
         "DO NOT REMOVE POWER! Now updating Backup BIOS region......" 
         in update beginning, after backup update completed, will show ¡°Done¡±.  

  - Fixed: After loading default, the internal Graphics will change from enable to disable
  - Fixed: After Loading default and boot into Windows server 2012, SUT has yellow 
           mark in device manager
  - Fixed: After setting Primary Display as PCI Add-on Card or Onboard Video in BIOS Setup, 
           there is no display when SUT boots into Windows Server 2012
  - Fixed: System cannot save Password after clearing Password.
  - Fixed: Failed flash Me after AC/DC.
================================================================================
                                R01.04.0002
================================================================================
Note: This BIOS version is able to support more CPUs which are listed in Processor
      support list on support.intel.com

- Fixed: Unexpected event logged when heating the PCH with heat gun.
- Fixed: The system will hang at POST Code 0xB2 with add-on video card after "Primary Display" 
         BIOS setting is changed to "Onboard Video".
- Fixed: If process cannot support VT-d, Intel(R) VT for directed I/O Option is visible.
- Fixed: The NIC1/NIC2 controller option cannot be saved to "Disabled" in BIOS setup menu.
- Fixed: Internal Graphic of the Intel(R) Processor G1820T doesn't work on the Intel(R) Server Board S1200V3RPM.
- Fixed: The read/write speed of USB3.0 device cannot reache the right speed when connected to USB3.0 port.
- Fixed: If AC lost occurs during BIOS update, the system may not be recovered via BIOS recovery method.
- Fixed: When windows running in S3+S5 mode and shutting down the system, the system will reboot.
- Fixed: Sometimes the system will reboot after shutting down the system in windows.
================================================================================
                                R01.04.0001
================================================================================
- Added: Microcode 0x00000017 update
- Added: ESRT2 legacy oprom update
- Added: iSCSI v2.8.25 legacy oprom update
- Added: RSTe legacy oprom and efi driver update
- Added: Code enhancement for SRIOV support
- Added: iGFX GOP UEFI driver update
- Added: PCI Enumeration Complete Protocol support
- Fixed: Slot4 PCIe device lost issue
- Fixed: Windows 2008 R2 blue screen issue when Adaptec* 6805 controller installed in slot 7
- Fixed: Processor1 P1 MTT - Upper Fatal error on VMWare ESXi 5.1 U1
- Fixed: Wrong SMBIOS type 41 records for Ethernet
- Fixed: "Turbo Boost" and "SpeedStep" don't work under Windows 2012
================================================================================
                                R01.03.0005
================================================================================
- Fixed: PCIe device lost issue on slot4.
================================================================================
                                R01.03.0004
================================================================================
vSystem can't boot into an OS or UEFI using Intel(R) Pentium(R) processors.
- Fixed: Red Hat* Linux* RHEL 6.4 32bit cannot be installed with 1GB DIMMs installed.
- Fixed: Corrected help text for "USB 3.0 support".
- Fixed: RAID mode incorrectly listed as "RST" - changed to "RSTe".
- Fixed: "9266" error is reported with certain add-in video adapters.

Other:
Added:	 TXT ACM V1.3 integration.
Updated: Video BIOS updated to version 2170

================================================================================
                                R01.02.0004
================================================================================
- Fixed: Signed driver check test fails due to an unknown device found in Windows 2012 WHQL
         (Windows Hardware Quality Labs) certification.

================================================================================
                                R01.02.0002
================================================================================
- Fixed: Memory DIMM will sometimes starts throttling, even in good thermal conditions.
- Fixed: System can't wake up from S3 via power button/USB device/Lan.
- Fixed: System power consumption cannot be limited by Node Manager.
- Fixed: BIOS version is not be updated accordingly in server management remote console.

Other:
 - Updated RSTe UEFI/Legacy OPROM to 3.7
    
================================================================================
                                R01.01.0006
================================================================================
- First production BIOS release.
 

[END OF RELEASE NOTES]
