=============================================================================
    Intel(R) Server Platform S2400SC FRU/SDR Update Release Notes
=============================================================================

INTEL(R) Product Collaboration and Systems Division
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA

=============================================================================

DATE:   Jan,6 2015

TO:	    Intel(R) Server Platform S2400SC customers

SUBJECT:    Integrate BMC(R) FRU/SDR update package S2400SC_FRUSDR_0113 release notes

=============================================================================
                               LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any
patent, copyright or other intellectual property right. Intel Corporation may
have patents or pending patent applications, trademarks, copyrights, or other
intellectual property rights that relate to the presented subject matter.
The furnishing of documents and other materials and information does not
provide any license, express or implied, by estoppel or otherwise, to any
such patents, trademarks, copyrights, or other intellectual property rights.
Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation.

*Other names and brands are the property of their respective owners.

Copyright (c) 2015 Intel Corporation.

=============================================================================
                              ABOUT THIS RELEASE
=============================================================================

SDR file version: 1.13
Baseboard FRU file version: 0.01
Master configuration file version: 1.13
FRUSDR Utility version: 11.0 Build 20

=============================================================================
        SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS
=============================================================================

- This FRU/SDR package has only been tested on S2400SC FAB3 baseboards

- BMC firmware rev 01.16 (or later) MUST be preinstalled prior to installing
  this FRU/SDR package

- BIOS R01.03.0002 or later
- MB Ver Fab3

=============================================================================
                      IMPORTANT INSTALLATION NOTES
=============================================================================

- Add R2000 Chassis support since version 1.06 FRUSDR

=============================================================================
            INSTALLATION PROCEDURE
=============================================================================

1. Ensure BMC release 01.16 or later is pre-installed before attempting this
   FRU/SDR update.

2. Copy all of the files in the S2400SC_FRUSDR_0109.zip archive to a USB key,
   hard disk drive or floppy drive.
   All of the files in this zip archive must reside in the same directory.

3. Boot to EFI and then run the following command to display the
   contents of the baseboard FRU device:

    FRUSDR /d FRU

   If device is empty(which is the case for all new FAB1 baseboards) or corrupted, then
   execute the following command to program the empty FRU device:

   For S2400SC:
        FRUSDR /fru S2400SC.fru

4. Now execute the following command to bring up the main FRU/SDR load menu:

    FRUSDR /cfg master.cfg


5. Select the option which is applicable to what you want to do. On a brand
   new baseboard I would highly recommend to run option 3 to program both
   the FRU and SDR. By reprogramming the FRU you will be given the option
   to input data from the keyboard into various chassis, board and product
   areas. Ensure that you select the correct chassis from the chassis
   selection menu otherwise your fan sensors will not be configured
   properly.

6. Once the package has finished its installation, I would highly recommend
   to DC power off the system and cycle AC power.

=============================================================================
                           KNOWN ISSUES/WORKAROUNDS
=============================================================================
- None

=============================================================================
                           FEATURES ADDED
=============================================================================
FRUSDR 1.13:
- None

FRUSDR 1.12:
- Update master.cfg file to  add 'Pwr Unit Redund' sensor to BHP chassis when insert two power supply.
- Add sensor "PSU1" and "PSU2" to monitor SmaRT&CLST event from ME. 

FRUSDR 1.11:
- Add the ME sensor "PSU1 STATUS" and "PSU2 STATUS"

FRUSDR 1.10:
- None

FRUSDR 1.09:
- Update some temperature sensor's normal value and threshold refer to config-table 3.6
- Update the data record of sensor "Exit Air"
- Update the system airflow formula record for R23XX chassis

FRUSDR 1.08:
- Modify master.cfg file to fix two issues

FRUSDR 1.07:
- Remove chassis intrusion feature from R2000 chassis
- Update R2000 chassis fan connection from fan 2,4,6 to 1,3,5
- Update fan domain map for R2000 chassis
- Update the R2000 chassis auto detection method

FRUSDR 1.06:
- Add R2000 chassis support since this version FRUSDR
- Add 600w Power supply support
- Add 2U 12x3.5'' HSBP support
- Add Storage front pannel 
- Add Stepwise sub-record for BHP24 chassis
- Update fan LC and LNC setting for BHP24 chassis
- Modify PS domain numer from domain 4 to domain 5

FRUSDR 1.05:
- Update length code for "BB +1.35 P2LV"
- Update Processor VRD hot sensor to auto re-arm
- Remove some clamp record's _SDR_TAG to match "OTHER" CHASSIS
- Remove clamp id #21 from "OTHER" chassis
- Update fan domain map record for 'OTHER' chassis
- Update DIMM Air Velocity record for 'OTHER' chassis 

FRUSDR 1.04:
- Master.cfg : change chassis code name to product name.
- Master.cfg : change copyright from 2011 to 2012.

FRUSDR 1.03:
- Follow Intel(R) Server Board S2600CP FSC config sheet Rev (5.1).

FRUSDR 1.02:
- Follow Intel(R) Server Board S2600CP FSC config sheet Rev (4.8).
- S2600CP.sdr: Modify SDR sensor name "Pwr Unit Status"(0x01),"SMI Timeout"(0x06),"BMC FW Health"(0x10),"PS1 Power In"(0x54), "PS2 Power In"(0x55).

FRUSDR 1.01:
- Follow Intel(R) Server Board S2600CP FSC config sheet Rev (4.7).
- S2600CP.sdr: modify FCT/FCT2 FAN FRU LED Mapping Number of mapping pairs.
- S2600CP.sdr: modify SDR Entity Instance.
- S2600CP.sdr: Global clamp records add IO Module Temp and SAS Module Temp.
- S2600CP.sdr: Add I/O MODULE , I/O MODULE FRU and clamp record.
- S2600CP.sdr: Add SAS MODULE , SAS MODULE FRU and clamp record.
- S2600CP.sdr: modify SDR Exit Air Temp(0x2E) Assertion/Deassertion Event Mask and Reading Mask & Settable to 0000.      

FRUSDR 1.00:
- Follow Intel(R) Server Board S2600CP FSC config sheet Rev (4.6).
- S2600CP.sdr: add SDR'PCIe Fat Sensor'(0x04)(two PCIe Fat Sensor).
- FRUSDR UTILITY upgrade to Version 11.0 Build 6.

=============================================================================
                           ISSUES FIXED
=============================================================================
FRUSDR 1.13:
- Change "PS1_NO_FRU" and "PS2_NO_FRU" in Master.cfg to "NO_PS1_FRU" and "NO_PS2_FRU" to allow manually select Power supply type when PSU FRU can't be detected.

FRUSDR 1.12:
- None

FRUSDR 1.11:
- None

FRUSDR 1.10:
- Update FRUSDR utility to 11 build 20.

FRUSDR 1.09:
- None

FRUSDR 1.08:
- It can auto detect two HSBP temp sensor with the upfrusdr.nsh,but only one temperature sensor can be read with cmdtool.
- Issue command FRUSDR.efi /d fru imbdevice 05 to read the HSBP FRU information ,the FRU information was different from the auto detection.

FRUSDR 1.07:
- None

FRUSDR 1.06:
- None

FRUSDR 1.05:
- Sensor E6 has invalid field in SDR file

FRUSDR 1.04:
- None.

FRUSDR 1.03:
- None.

FRUSDR 1.02:
- None.

FRUSDR 1.01:
- None.

FRUSDR 1.00:
- None.

=============================================================================
                             REFERENCE MATERIAL
=============================================================================
CONFIG-FSC Rev 5.1 datasheet.

[END OF RELEASE NOTES]