Intel(R) Server Board S2600WT product family, Intel(R) Server System R1000WT
	product family and Intel(R) Server System R2000WT product family 
	Firmware Update Package for Intel(R) One Boot Flash Update Utility, 
	Windows* Preboot Execution Environment 
================================================================================
Intel Enterprise Platform & Services Division - Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA
================================================================================
DATE    : 	Jan 28 2016
TO      : 	Intel(R) Server Board S2600WT product family
		Intel(R) Server System R1000WT product family
		Intel(R) Server System R2000WT product family
                customers
SUBJECT : Release Notes for System Firmware Update Package 
================================================================================
                              ABOUT THIS RELEASE
================================================================================
BIOS:     	01.01.0015
ME:        	03.01.03.021
BMC:     	01.41.9579
FRUSDR:		112
================================================================================
                           Support Platforms and Dependency
================================================================================
Processors supported: 
 Intel(R) Xeon(R) processor E5-2600 v3 series Processor
    Intel(R) Xeon(R) processor E5-2600 v4 series Processor

Microcode update versions:
0x306f2   0x00000036   Production (E5-2600 v3 C0/C1)
0x406f1   0x0b000010   External   (E5-2600 v4 B0)

Production boards:
  Product		Fab Version	      
  S2600WT		Fab3 (PBA# -35x) or above    

The following update process must be followed to ensure a trouble free update.
1.	Manageability Engine (ME) firmware
2.	BIOS
3.	BMC firmware
4.	FRUSDR 

================================================================================
                  System Firmware Update Package Usage instructions                   
================================================================================
This package can be updated using one of the following methods:
 - Windows* or Linux* operating system using Intel(R) One-boot Flash Update (OFU)
   V13.1 Build 11 or later)
 - Windows* Preboot Execution Environment (WinPE)

To update from Windows* and Linux* or operating systems using the Intel(R) One Boot
Flash Update Utility (OFU)

Intel(R) One boot Flash Update utility can be downloaded from http://downloadcenter.intel.com/
and it is part of the "BIOS, Firmware Update & Configuration Utilities" for 
Windows* and Linux*. Please refer to Intel(R) OFU user guide about the details of 
installation and usage of OFU.

Use OFU to update system firmware by the following steps:
- Install OFU on Windows* or Linux* system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows* command line/Linux* terminal window:
  <OFU install folder name>:\flashupdt -u  <package folder name>\flashupdt.cfg
                       
To update from Windows* Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows* PE customized image 
for creating a bootable Windows* PE CD. User is able to update system firmware from 
customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" 
  (name may be varied depends on your own customization)
  
Note:
1. The Intel(R) OFU utility is case sensitive. Therefore, when you transfer the 
Firmware Update Package using USB flash drive from a Microsoft Windows* system to a Linux
environment, you must first extract under the Linux* environment. Otherwise, you 
will need to mount the USB flash drive manually with 'vfat' option under Linux to avoid 
conversion from upper case to lower case and vice versa.

2. To make Intel(R) OFU utility run properly under x86 or x64 OS, you have to read
OFU release notes on known issues for OFU installation.

3. In this SFUP package, Intel only provide batch file "WinPE_x86_Update.bat"
for WinPE2.0 32 bit solution "WinPE_x64_Update.bat" for WinPE2.1/3.0 64 bit 
solution as an example. Please refer to white paper "White Paper-Intel Server 
Utilities Procedure for WinPE.pdf" for details on building your own customized 
WinPE CD.

4. Windows PE 2.0 - built from Windows Vista SP1 32bit or EM64T
5. Windows PE 2.1 - built from Windows Vista SP1 or Windows Server 2008, EM64T
6. Windows PE 3.1 - built from Windows Server 2008R2, EM64T
7. Microsoft IPMI driver is loaded by default from WinPE CD, if you want to use 
Intel IPMI driver instead of MS IPMI driver for firmware update, you can un-install
Microsoft IPMI driver by:
                Devicesetup.exe Cv remove *IPI0001
                Note: IPI0001 is the device ID for Microsoft IPMI driver.
8. If to update backup BIOS region or NVRAM, you need to customize the OFU update 
       scripts (eg.flashupdt.cfg) and add "UpdateBackupBios" or "UpdateNvram" parameter.
================================================================================
			IMPORTANT NOTICE
================================================================================
1. The BIOS R01.01.0002 auto scripts will force to update both normal and backup
   BIOS region since security revision was updated, once user upgrade BIOS to
   R01.01.0002, it will prevent BIOS downgrade to previous version that with low
   security revision, user can use BIOS recovery mode for BIOS downgrade
2. The BIOS R01.01.0003 included security fix and security revision upgrade,
   refer to item #1
3. If doing online BIOS update to R01.01.0003, user must use the auto scripts
   enabled in the release package which will force update BIOS NVRAM and backup
   region
4. BIOS R01.01.0004 requires update of NVRAM and backup region
5. BIOS R01.01.0009 and D0019 will enable UEFI Secure Boot and include below limitations:
    - Please read "BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD" section in this
      BIOS release notes
    - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade.
    - BIOS downgrade is not allowed if user has enabled BIOS secure boot. All customer
      setting will be lost also if downgrade to previous BIOS release.
    - Backup BIOS region is also required to be updated to prevent recovery failure
      please use release package to update BIOS.
    - There is downgrade hang risk if you don't follow above rules.
    - Further BIOS release will not suffer from these side effects as the NVRAM region
      is formatted as authenticated variable storage
6. System will hang 0xbf after downgrading BIOS from D0055(E5-2600V4 code tree) to R0011/R0009(E5-2600V3 code tree) randomly.
    -Set SUT to recovery mode to power on, then set it back to normal boot to see whether it is recovered.
7. The iFlash32 utility parameter of 'UpdateNvram' is not supported under Normal Mode, however it is only supported under Recovery Mode.
8. Design change from D076 for <PCIe correctable error threshold> to change default setting from <All> to <10>. 
              Need to press <F9> to see the new default string.
9. Suggest to press 'F9' to load default if using the 'IOU Non-posted prefetch control' setup options in the first time.


Notes:
  As the code base has been changed due to E5-2600V4 support, R009 to R012 are not
  shown in the E5-2600V4 aware BIOS release notes, but the related fix is added. 

E5-2600V3: 
  R001 - R008 ==> R009, R010, R011, R012 ==> Discontinue for E5-2600V3 alone code base
     
E5-2600V3 + E5-2600V4:
  R001 - R008 ==> (Contains the fix in R009 to R012) ==> R013, R014,

================================================================================  
     BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD 
=================================================================================   
1. Customer Setting Loss Issue and Mitigation Method
    When user upgrades BIOS with secure boot feature, the NVRAM will be automatically 
  formatted as authenticated variable physical storage. However, all previous customer 
  settings storage in NVRAM will be lost even if user does not enable UEFI secure boot 
  feature. 
    Users can take the follow recipe to save and restore their settings based on 
  the actual NVRAM usage if they wish to upgrade or downgrade between BIOS with or 
  without secure boot feature. 
    Supposing customer requires to save & restore their specific NVRAM named 'var':
  Steps:
  1. Prepare FAT partition USB key (or HDD).
  2. Boot to EFI shell.
  3. Check the file system mapping (e.g. fs0:) of the USB key with 'map -r' command.  
  4. Use 'dmpstore var -s fs0:\var.bin' to save the variable to the physical file.
  5. Perform BIOS update and reboot system.
  6. Boot to EFI shell.
  7. Use 'dmpstore var -l fs0:\var.bin' to restore the variable.
  8. Reboot the system if the customer setting requires reboot to take effect.

Notes:
  1. Immediate reboot after BIOS update is mandatory. Or the restore operation will 
     not take effect.
  2. Customers can repeat step 4 and step 7 for several times if they need to save & restore 
     multiple NVRAM variables.
  3. Most of BIOS customer settings by SysCfg can also be restored in this way. Customers 
     can follow previous step1~8 by substituting 'Setup' for 'var' in the sample. 
  4. For BIOS downgrade case, step7 cannot be used to restore authenticate variables 
     (e.g. PK, KEK, DB, DBX) to non-authenticated NVRAM storage

2. Recovery Mode Failure
   There is known bug that it cannot POST successfully with authenticated NVRAM storage.
   This will cause platform recovery failure and permanent deny of service (PDOS) if the 
   primary BIOS region gets corrupted for some reason. It is required to update backup BIOS 
   region when upgrade BIOS capsule with secure boot feature. 
Notes: 
  For downgrade case, user is not required to update backup BIOS region as new 
  BIOS with secure boot feature can handle NVRAM with old storage format: 
  it will format it to new authenticated variable storage automatically.  
  However, care must be taken when downgrading BIOS in recovery mode: After flashing 
  BIOS without secure boot feature, user should restore recovery HW jumper immediately 
  before platform reset.If platforms reset occurs before restoring recovery HW jumper, 
  the backup BIOS will once again format NVRAM to new storage format, which will cause 
  newly flashed BIOS (without secure boot feature) POST failure after user restores 
  recovery HW jumper.


================================================================================
			FEATURES ADDED/REMOVED
================================================================================
  
================================================================================
	       			 R0015
================================================================================
Rollback CL331974, issue found with this new ESRT2 EFI Driver
EPSD100031270 CPU core display mismatch by changing BIOS CPU core setting.
Remove [Esc] key help string and change BIOS ID
Broadwell Full support
================================================================================

================================================================================
			    Issues fixed ME
================================================================================   
Unexpected SmaRT&CLST events may be observed after removing 1 of 2 PSUs. 
Sometimes Predictive Power Limiting Node Manager Policy may over throttle platform after SMBAlert assertions. 

===============================================================================
                        KNOWN ISSUES/WORKAROUNDS/REQUIREMENTS
===============================================================================
- This BMC FW update package is to be used only on PCSD server baseboards and
  does NOT support customer reference boards (CRB) or silicon reference
  platforms (SRP).
  Contact your Intel Representatives to determine where to download the BMC FW
  for these products.

- The BMC FW image file in this package is to be used only with the provided
  FWPIAUPD update utility.
  Using the FW image file with a SPI flash device programmer will result in a
  non-functional system.  

- Some open source ipmi utilities may automatically retry multiple times during  
  access BMC using bad password and supporting IPMI specification 1.5 in Linux OS.
  CCB310 will log more bad password login SEL.

===============================================================================
                         Issues fixed BMC
===============================================================================

-EPSD100249257: (X)12GB bridgeboard sensor no longer seen after updating to 
                 BIOS 1.01.009SUP with SDR Package 1.09 on S2600KP/TP.
		 
		 
01.41.9519(Internal version)

-EPSD100030179: IE11 displaying EWS->Configuration->Server Diagnostics with Old 
                System Debug Log text exceeds the Box size
-EPSD100030713: Using EWS cannot get information when using BMC version 1.38/1.39.


01.40.9455(Internal Version)
-EPSD100030395/EPSD100030381: The second HSBP related sensors show in unavaliable state
                 when 2 HSBP are configured in chassis.
-EPSD100028376: When Solve BMC error, the status LED cannot change to Solid Green
                from Blinking Amber automatically.
-EPSD100250458: Unknown SEL event after XEON Phi Ctrl Alt Del reset (possibly other resets as well).
-EPSD100029078/EPSD100029080/EPSD100030117/EPSD100250535: DIMM Thrm Mrgn 1 sensor 
                shows up as upper non-critical.
-EPSD100030156: The SUT will wait over about 20 seconds than expected time before 
                SUT auto powering up.
-EPSD100250626: S2600TP BMC System Power statistic incorrect when the platform 
                 runs in standalone mode
-EPSD100250525: Fan Fault LED not functional on S2600CW board.
-EPSD100250872: BMC firmware OEM command about write SSL certification file fail to upload.
-EPSD100250216: EWS Alerts page wording (Select the events that will trigger alerts:) 
                confusing to customer when IPMItool is used to modify Alert Action settings.
-N/A: Matched the TSOD addresses and memory controller PECI addresses.
-N/A: ME SELs don't decode correctly.
-N/A: BMC change to ensure the system remains off after an over current event (OCP) 
      until the system has been AC power cycled.

-N/A: Disable onboard NIC from BIOS,system fan run at high speed.

=============================================================================
                           ISSUES FIXED FRUSDR
=============================================================================
S2600WT_112:
-EPSD100250236: [Flash]NVMe drives show as "All deasserted" in 1U servers.
-EPSD100030395: HSBP Temp1 and Temp2 sensor was unavailable on EWS.
-EPSD100250298:Disable onboard NIC from BIOS of KNP/TLP, all system fan run at high speed.

================================================================================
                              FEATURES ADDED 
================================================================================    
S2600WT_112:
-None.

=============================================================================
                            LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products. 
No license, express or implied, by estoppel or otherwise, to any intellectual 
property rights is granted by this document. Except as provided in Intel's 
Terms and Conditions of Sale for such products, Intel assumes no liability 
whatsoever, and Intel disclaims any express or implied warranty, relating to 
sale and/or use of Intel products including liability or warranties relating 
to fitness for a particular purpose, merchantability, or infringement of any 
patent, copyright or other intellectual property right. Intel Corporation may 
have patents or pending patent applications, trademarks, copyrights, or other 
intellectual property rights that relate to the presented subject matter.  
The furnishing of documents and other materials and information does not 
provide any license, express or implied, by estoppel or otherwise, to any 
such patents, trademarks, copyrights, or other intellectual property rights.  
Intel products are not intended for use in medical, life saving, or life 
sustaining applications. Intel may make changes to specifications and product 
descriptions at any time, without notice.

Intel is a registered trademark of Intel Corporation. 
*Other names and brands are the property of their respective owners.
Copyright (c) 2016 Intel Corporation.

A portion of this firmware is open source code, which falls under the
GPL 2.0 license.  

[END OF RELEASE NOTES]

  