NCSI: chan(0:00) CMD - Disable Channel
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Clear Initial State
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - AEN Enable
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) set MAC - 98:4F:EE:15:3C:0D
NCSI: chan(0:00) CMD - Set MAC Address
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Enable Broadcast Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[1] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[2] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[3] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[4] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[5] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[6] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[7] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: setting chan(0:00) VLANfilter[8] = 0x0000, -
NCSI: chan(0:00) CMD - Set VLAN Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) set VLAN mode 0x03

NCSI: chan(0:00) CMD - Enable VLAN
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Disable Global Multicast Filter
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - OEM Command
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Enable Channel Network TX
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Get Link Status
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
NCSI: chan(0:00) CMD - Enable Channel
NCSI: chan(0:00) RSP - Response=0x0000, Reason=0x0000
