|c|b CONGRATULATIONS ON YOUR PURCHASE OF "NAVY SEAL" |b.

	This text is provided to include last-minute information not
included in the manual. Please read this information in its entirety 
before continuing with the installation. Use the [PgUp] or [PgDn] keys 
to scroll through the text. If you have a printer, press the [F3] key to 
print this file.



|b|c-FLOPPY DISK SYSTEM USERS-|b

You must have THREE 5-1/4" or 3-1/2" blank formatted disks
available to prepare this software for use on a floppy-based computer.
You will be guided during the install process as to how to label
each of the disks.

To install on a floppy system, you must boot your computer
with a RAMDRIVE specification in the CONFIG.SYS file on your dos boot
disk. The ramdrive must be no less than 50K and no greater than 60K
bytes in size. See your DOS manual on this subject.

You must also have the line FILES=20 in the CONFIG.SYS file and
you must copy the file COMMAND.COM from your DOS boot disk to the
NAVYSEAL distribution disk #1.

EXAMPLE: If you have IBM DOS version 3.3, Your CONFIG.SYS file should
look like:

	FILES=20
	device=vdisk.sys 50

Other versions of DOS use RAMDRIVE.SYS or some other means of setting
up a ramdrive. Refer to your dos manual.

You should make a backup of CONGIG.SYS before editing it.

If you haven't set up a ramdrive, then quit this install, edit your
CONFIG.SYS file, re-boot your computer, make a note of the ramdrive
letter, then run this install again.

|C|B- Our apologies to the Single Floppy User -|b

Many companies wouldn't even consider making a system of this scope
available to users with a single-floppy drive because, for those users,
the installation can be somewhat cumbersome. If you've been thinking of
expanding your computer with another floppy drive (or better yet - a hard
disk), then this would be a good time to do so. You may find yourself 
disliking the author of this installation procedure for single floppies,
but I think you'll LOVE him once you do have it installed!


|c|b- MORE STUFF! -|b!

	We expect you're saying to yourself, "Wow! I sure gotta good deal
with this software!". Well, there's more great values where this came from!
For example, TOP-10-SOLD-GOLD I AND II contain even more arcade,
adventure, creativity, simulation, and strategy hits for only $14.95
retail! Cosmi also provides highly acclaimed home/office productivity
software such as DATABASE, WORD PROCESSING, SPREADSHEET, FORMS MAKER, FORMS
FILLER, PAINT, DESKTOP PUBLISHER, ACCOUNTANT, FIXED ASSETS MANAGER,
PERSONAL PROPERTY MANAGER, and MAIL LIST MANAGER, all available at $9.95
retail. Look for these at your favorite software store. If you are unable
to find these great values you may call us at 213-833-2000 (ask for
customer order dept.) and purchase any or all of these titles from us.

Note: You may print this entire text file by pressing the |b[F3]|b
function key.

|b|c-Corrections to the manual-|b

On page 3 of the manual, under CONTROLS, the manual specifies that the
<spacebar> activates a weapon. That is not correct. Use the <Shift> key
to use a weapon, NOT the <spacebar>. Every reference to spacebar throughout
the manual should be replaced with <Shift> key.

When in "Operation GODZILLA", TAP the <Shift> briefly to jump from the
transport etc. Do not keep the <Shift> key pressed down too long as it
may cause you to jump and open and release the chute all at one time.

|C|b-A Note on Speed-|b
Navy Seal runs best at 12 MHZ if your computer runs at a faster speed and
you have a TURBO key to slow it down, then it is recommended.

|CENJOY!
|CRay Hogue - Director of Programming
