
  From the front you can steer the ship real time, and thus navigate 
  at a resolution not possible from the NavMap Plotter facility.
  Turn the engines on, and you can proceed to traverse the oceans.
  You steer with the steering wheel, by pressing the L/R arrow keys.
  You can press more than once to increase the rate of turn.
  Up and Down arrow keys to advance the ship's throttle, with max-
  imum speed of 30 miles/hr. If you are looking out the pilothouse, then
  to your immediate back lies the navigational instruments you need.
  The instrument room houses the NavMap, which you use to Plot a course
  and "time warp" to a destination. For finding things below the water
  surface you will use your Sonar, Depth Sounder, and Magnetometer.

  The following key/mouse actions are possible from the front
  pilothouse.
  To go to the instrument room, press 'i' or click on the Mirror.
  To go to Port (you must be within .6 mile of one), press 'p' or
  click the CB transmitter located above the center window.
  To bring up the clipboard to take logs, press 'c' or click the
  clipboard on the dash.
  To turn engines on/off, press 'e' or click the ignition key.
  UP arrow, DOWN arrow to increase/decrease ship speed.
  LEFT, RIGHT arrow to turn the ship.
  Press 'r' to go to the Recroom/Maproom for a diversion. The 
  engines must be off to go to the Recroom/Maproom.
  You can click on the horn cord to hear the horn if you have a
  sound board.

  Gauges are:
  (clockwise from EngineTemp far left, 2nd gauge from bottom)
  Engine Temperature.
  Speedometer.
  Voltmeter.
  Fresh Water Level.
  Oil Pressure.
  Fuel Level.

  Other:
  Warning lights on dash, left to right:
      EngineTemp, WaterLevel, FuelLevel, Voltage, OilPressure.
  Tripmeter, reset at any Porting, lower left corner above throttle arm.
  Clock, on dash left end - make sure your system time is correct.
  Horncord hangs down on right side.
