[LANGUAGE]{UK ENGLISH}
[0000]{Welcome to }
[0001]{.  We recommend study of the User Guide}
[0002]{to ensure that the program is set up correctly for each user.}
[0003]{This setup program will enable you to configure }
[0004]{for your own particular use.  It will also set up working}
[0005]{directories on your hard disk and copy certain essential files}
[0006]{to them.}
[0010]{Cannot load essential INI file.  Check your manual and}
[0011]{the README file for further setup information.}
[0012]{ Help - 'Source drive:' }
[0013]{Type in the letter of the drive which currently contains your CD,}
[0014]{then press <Enter>.}
[0015]{}
[0016]{Source drive:      }
[0017]{ Help - 'Working drive:' }
[0018]{You must specify an area of your hard disk where certain}
[0019]{information can be stored.  Type the hard drive letter then press}
[0020]{<Enter>.}
[0021]{Working drive:     }
[0022]{ Help - 'Working directory:' }
[0023]{If the directory displayed is the one you want, simply press <Enter>.}
[0024]{Otherwise, type in the required name then press <Enter>.}
[0025]{NB:  The working directory will contain the sub directory }
[0026]{NB:  The working directory will contain the sub directories:}
[0027]{Working directory: }
[0028]{ Press <F10> to begin Setup.  Press <Esc> to quit. }
[0030]{}
[0031]{Do you really want to quit?  Press 'Y' for yes or 'N' for no.}
[0033]{Error: }
[0034]{File }
[0035]{ not found.}
[0036]{Path not found.}
[0037]{Too many files open.}
[0038]{Access denied to file }
[0040]{}
[0041]{The settings you have chosen are:}
[0042]{   Install from a CD in drive }
[0043]{   Store files in directory }
[0044]{Press 'Y' to proceed with these settings, any other key to stop.}
[0045]{Installing:}
[0047]{No disk present, faulty disk, or no such disk drive!}
[0048]{          Put the master disk in drive }
[0049]{ Press <Esc> to stop, any other key to continue.}
[0050]{}
[0052]{         Put the master disk in drive }
[0055]{      Put the destination disk in drive }
[0058]{   The destination disk has insufficient space for}
[0059]{   setup (}
[0060]{, bytes needed, }
[0061]{ bytes available).}
[0064]{The destination disk has sufficient space for setup.}
[0065]{}
[0067]{    The destination disk has sufficient space for setup.}
[0070]{}
[0071]{Setup information already exists.  Do you want to}
[0072]{overwrite it? (Y/N).}
[0074]{Unable to create directory }
[0075]{ Press <Esc> to stop, any other key to try again.}
[0078]{Unable to create directory }
[0079]{Error: Directory path is invalid.}
[0080]{Error: Invalid file handle.}
[0081]{Error: Destination disk is write protected.}
[0082]{Error: Drive not ready.}
[0083]{Error: Device write fault.}
[0084]{Error number: }
[0085]{}
[0086]{ Press <Esc> to stop, any other key to try again.}
[0090]{Creating: }
[0091]{ - CD Version}
[0093]{  It is not possible to write data to this CD.  It is essential,}
[0094]{  therefore, to create a directory on your hard disk where certain}
[0095]{  files can be stored ('}
[0096]{').  The '}
[0097]{' directory}
[0098]{  is used solely for this purpose.  Should you no longer wish to use}
[0099]{, you can delete this directory and its files.}
[0100]{Copying:                                      }
[0103]{Warning!}
[0104]{========}
[0105]{The program has attempted to create a data directory on your hard}
[0106]{disk but has been unable to do so.  This means that results, high}
[0107]{scores and defaults will not be updated during play.}
[0108]{       Press <Esc> to quit or any other key to continue.}
[0109]{Copying:}
[0110]{}
[0113]{                         Setup completed.}
[0115]{}
[0116]{                    Press any key to continue.}
[0117]{Remove disk: }
[0118]{                  Press any key when finished.}
[0119]{Insert disk: }
[0120]{}
[0121]{Unpacking files, please wait...}
[0122]{Not enough memory available to unpack the files.}
[0123]{To complete the setup type }
[0124]{ in directory }
[0125]{ at DOS prompt.}
[0126]{The file }
[0127]{.exe' has not been found on this disk, so it has}
[0128]{not been possible to unpack the files.}
[0129]{DOS error }
[0130]{ reported when attempting to unpack files.}
[0131]{Press any key to continue.}
[0134]{Source drive:        }
[0135]{Working drive:       }
[0136]{Working directory:   }
[0139]{ - HELP}
[0140]{Parent/Teacher Section}
[0143]{ - Setup Program V1.0 }
[0144]{ Introduction }
[0145]{NB: If you want to run }
[0146]{ from Windows, you should exit}
[0147]{this DOS Setup Utility now and use the Windows version.  To run}
[0148]{the Windows version select File, Run from Program Manager, then}
[0149]{type  X:\SETUP  where X is the drive containing your CD.}
[0150]{(C) Lander Software 1996}
[0151]{ Press any key to continue, <Esc> to quit. }
[0153]{Working area: }
[0155]{}
[0160]{}
[0165]{}
[0170]{}
[0175]{}
[0180]{}
[0185]{}
[0190]{}
[0195]{}
[0200]{}
[0205]{}
[0210]{}
[0215]{}
[0220]{}
[0225]{}
[0230]{}
[0235]{}
[0240]{}
[0245]{}
[0250]{}
[0255]{}
[0260]{}
[0265]{}
[0270]{}
[0275]{}
[0280]{}
[0285]{}
[0290]{}
[0295]{}
[0300]{}
[0305]{}
[0310]{}
[0315]{}
[0320]{}
[0325]{}
[0330]{}
[0335]{}
[0340]{}
[0345]{}
[0350]{}
[0355]{}
[0360]{}
[0365]{}
[0370]{}
[0375]{}
[0380]{}
[0385]{}
[0390]{}
[0395]{}
[0400]{}
[0405]{}
[0410]{}
[0415]{}
[0420]{}
[0425]{}
[0430]{Hooray for Maths - HELP}
[0431]{Parent/Teacher Section}
[0432]{View Results}
[0433]{ HELP: }
[0434]{ Press <F1> or <Esc> to leave HELP }
[0435]{HELP}
[0436]{Press any key to continue}
[0437]{Press <Esc> repeatedly to go to the}
[0438]{Control Screen.}
[0439]{Press <Ctrl-Q> to quit the program.}
[0440]{}$
[0442]{ HELP: }
[0443]{Use the UP and DOWN cursor keys and <PgUp>,<PgDn> to move around}
[0444]{the document.}
[0445]{To print the document, press <Ctrl-P>.}
[0446]{To leave HELP press <Q> or <Esc>.}
[0447]{ Press <F1> for HELP                                               <Q> to quit}
[0448]{File not found: }
[0449]{Path not found, or invalid file name: }
[0450]{Drive not ready: }
[0451]{Disk seek error: }
[0452]{File error }
[0453]{ reported}
[0454]{This file is empty - press a key}
[0455]{Printing file - please wait}
[0456]{Line:}
[0457]{HELP - }
[0458]{Printer error '}
[0459]{' discovered}
[0460]{Retry [Y/N]}
[0461]{--------------------------------------------------------------------------------}
[0462]{Not enough memory to view help files - press any key.}
[0465]{Too many screens}
[0466]{ HELP }
[0467]{ Dialogue }
[0468]{'Press:}
[0469]{  Y for yes}
[0470]{  N for no}
[0473]{Enter another filename}
[0474]{or}
[0475]{press <ESC> to skip}
[0476]{Once you have read}
[0477]{the information in}
[0478]{the dialogue box,}
[0479]{press <Esc> to go on}
[0480]{Error: Not enough RAM to run this program.}
[0481]{ bytes requested but only }
[0482]{ bytes available.}
[0483]{Do you have a printer connected}
[0484]{and is it ready to print? [Y/N]}
[0485]{Printer error (}
[0486]{) discovered}
[0487]{Retry [Y/N]}
[0488]{EPSON DOT-MATRIX}
[0489]{HP LASERJET II  }
[0490]{IBM PROPRINTER  }
[0495]{}$
[0500]{   Settings: IO_Address  : }
[0501]{             IRQ_number  : }
[0502]{             DMA_channel : }
[0503]{About to get sound info from }
[0504]{Sound card information not found.  Type 'SSETUP' then press <Enter> to}
[0505]{configure this program.}
[0506]{Initialising driver: }
[0507]{Couldn't load sound driver }
[0508]{Error: Not enough memory.}
[0509]{Error: Unable to open driver file.}
[0510]{Error: Unable to locate driver file.}
[0511]{Press any key to continue}
[0513]{Driver }
[0514]{ not compatible with API version.}
[0515]{Driver }
[0516]{ not found at these settings:}
[0517]{Use 'SSETUP' to configure this program correctly.}
[0520]{   Sound Card Diagnostics}
[0521]{   ======================}
[0522]{   Voice driver }
[0523]{ loaded OK.}
[0524]{ not loaded.}
[0525]{   Music driver }
[0526]{   Global timbre name - }
[0527]{   General sound status - }
[0528]{   Mouse driver loaded - }
[0529]{                Press any key to continue}
[0530]{}$
[0532]{in first time,1 }
[0533]{in first time,2 }
[0534]{Memory Error.}
[0535]{in first time,3 }
[0540]{}
[0545]{}
[0550]{}
[0555]{}
[0560]{}
[0565]{}
[0570]{}
[0575]{}
[0580]{}
[0585]{}
[0590]{}
[0595]{}
[0600]{}
[0605]{}
[0610]{}
[0615]{}
[0620]{}
[0625]{}
[0630]{}
[0635]{}
[0640]{ HELP: }
[0641]{Use the UP and DOWN cursor keys and <PgUp>,<PgDn> to move around}
[0642]{the document.}
[0643]{To print the document, press <Ctrl-P>.}
[0644]{To leave HELP press <Q> or <Esc>.}
[0645]{ Press }
[0646]{<F1>}
[0647]{ or }
[0648]{<Esc>}
[0649]{ to leave help }
[0650]{}
[0654]{ for HELP, cursor keys (}
[0655]{<PgUp><PgDn>}
[0656]{) to navigate, }
[0657]{<Q>}
[0658]{ to quit}
[0660]{}
[0662]{Not enough memory to view help files - press any key.}
[0665]{}
[0670]{}
[STOP]

