This software is provided without support and without any obligation
	on the part of Silicon Graphics, Inc. to assist in its use,
	correction, modification or enhancement.  There is no guarantee
	that this software will be included in future software releases.

	THIS SOFTWARE IS PROVIDED "AS IS" WITH NO WARRANTIES OF ANY KIND
	INCLUDING THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR
	A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR
	TRADE PRACTICE.

        In no event will Silicon Graphics, Inc. be liable for any lost
        revenue or profits or other special, indirect and consequential
        damages, even if Silicon Graphics, Inc.  has been advised of the
        possibility of such damages.


Contents:

	xdbx.tar
	    A tar archive containing the necessary images to install 
	    executable copies of xdbx on an SGI workstation running 
	    IRIX 5.2+.

Description:

	xdbx provides a simple X based GUI for dbx.
	
	Below are comments from Po Cheung (the xdbx original author) and 
	Kevin Dalley (person who provided the SGI patches)  The source
	code is included as part of the installable image.

	Just to be explict, the authors to do work for SGI.  I simply
	compiled the code and packaged it up in an installable format.

Instructions:

	Copy xdbx.tar to /usr/tmp.

	    % su
	    # mkdir /usr/local/dist
	    # cd /usr/local/dist
	    # tar xvf /usr/tmp/xdbx.tar
	    # inst -f /usr/local/dist

	Then follow the instructions from inst.  To find out more about
	inst, consult the inst(1M) man page.


	The inst images of "xdbx" in /usr/local/dist can be used by 
	networked machines to install from.  On the remote machine:

	    % su
	    # inst -f guest@"machine with images":/usr/local/dist

	Then follow the instructions from inst again.


...robert keller (rck@sgi.com)



    Xdbx Version 2.1
    ~~~~~~~~~~~~~~~~
    This is the source distribution of xdbx, version 2.1 for X11R4 only.
    Xdbx implements an X window system interface to the dbx debugger.  It
    uses X11R4 Xt Intrinsics and Athena widgets.  Xdbx supports dbx on the 
    Sun 3, Sun 4 workstations, and the DECstation 3100.

    Changes since version 2.0
      +  conversion to R4
      +  addition of icon
      +  text selection behavior
      +  bug fixes and enhancement

    Xdbx has been tested on the following platforms:
      o  Sun 4 running SunOS 4.0.3
      o  Sun 3 running SunOS 4.1
      o  Sun 3 running SunOS 4.0.3
      o  DECStation 3100 running Ultrix 3.1
      o  OpenWindows 1.1, 2.0
      o  Window managers: mwm, twm, olwm

    Bugs:
      o  xdbx may get into an infinte loop while running on the DECstation 3100

    Please send comments and bug reports to:

	Po Cheung
	cheung@sw.mcc.com	
	Microelectronics and Computer Technology Corporation
	  -- or --
	po@cerc.utexas.edu 	
	University of Texas at Austin

    *********************************************************************************

    From: kevin@tamri.com (Kevin Dalley)
    Newsgroups: comp.windows.x,comp.sys.sgi
    Subject: Re: Xdbx working on SGI Irix 4.0.X
    Message-ID: <KEVIN.92Oct26194546@polkacide.tamri.com>
    Date: 27 Oct 92 03:45:50 GMT
    Organization: TOSHIBA America MRI, South San Francisco, CA

    >>>>> On 21 Oct 92 18:21:34 GMT, williams@herky.cs.uiowa.edu (Kent Williams) said:

    Kent> Legend has it there are patches floating around to get Xdbx to work
    Kent> on sgi machines.  Someone want to mail them to me?

    Here's a few patches.  A few of the files were borrowed from mxgdb,
    which was originally a spin-off of xdbx.  Turnabout is fair play.
    Many of the patches are purely to port to the sgi, many other patches
    are general xdbx bug fixes and should probably be applied to all
    versions of xdbx.  This should be applied to version xdbx-2.1,
    patchlevel 2.  I've had these for a while.  I figure it's
    about time to post them.

    Anyway, here's the patches:
    :