
*****************************************************************************

    INSTALLING THE NETWARE DOS IPX SERVER DRIVER (Version 2.2 Only)

*****************************************************************************

 Step 1. Format a blank floppy giving it a volume label of LAN_DRV_422.
	 Copy the following files from the enclosed diskette to this 
	 newly created floppy:
	   
		a:\netware\srvipx\ADEPCA.OBJ
		a:\netware\srvipx\BDEPCA.OBJ
		a:\netware\srvipx\CDEPCA.OBJ
		a:\netware\srvipx\DDEPCA.OBJ
		a:\netware\srvipx\DEPCAOS.LAN
		
 Step 2. To create a new server IPX use Novell's SHGEN utility 
	 following the directions in Novell's manual "INSTALLING and 
	 MAINTAINING THE NETWORK" page 51. For step 4b of the instructions 
	 use the LAN_DRV_422 floppy created in step I.E.1, and select  
	 DEC DE100/DE200/DE210/DE422 v1.03EC (921105).

	 *NOTE* This will create an IPX.COM using the default settings
	 for the DEC EtherWORKS Adapter as shown below. To modify the
	 IPX.COM for settings other than default use the Novell utilities
	 JUMPERS/ECONFIG. Consult the Novell manuals for instructions.
	 
	   Example of Default Settings:
	   
	   MEMORY ADDRESS = D000
	   I/O ADDRESS    = 0300
	   IRQ            = 5
	   FRAME          = 802.3
	   
	   Note that the IRQ, MEMORY ADDRESS, and I/O ADDRESS of the
	   DEC EtherWORKS Adapter must not conflict with other PC
	   adapters installed in the PC.
   
   I.E.3 Once IPX.COM has been created add it to the Startup file
	 of the PC along with the appropiate NETx.EXE file.
	 
	 Example startup file:
	 
				   C:\IPX
				   C:\NETx


         NOTE: The NETWARE IPX Drivers currently support 64KB and 32KB 
               modes only.
			      
