File: A:\README.TXT             18-NOV-1994             Page  1 of  3

		    Digital EtherWORKS TURBO EISA V2.1

  CONTENTS:     Introduction..................................Page 1
		List of Drivers...............................Page 1
		Information on Media Configuration ...........Page 1
		Directory Tree of Diskette....................Page 2,3

  INTRODUCTION:

  Thank You for purchasing a Digital EtherWORKS TURBO EISA Network Interface
  Card.  Digital's Network Products Group is committed to providing you with
  updated EtherWORKS TURBO EISA device drivers to ensure that these cards
  will install easily, perform exceptionally well, and will operate in all 
  the latest network operating systems (NOS).

  This file contains important information that was not available when the 
  EtherWORKS TURBO EISA User Information Guide was printed. A RELEASE.NOT file,
  also included in the root directory of this diskette, contains detailed 
  technical information regarding known anomalies in the use of the EtherWORKS
  TURBO EISA cards.

  EtherWORKS TURBO EISA Network Interface Cards use the Digital DC21040 
  Ethernet controller chip.  Throughout this distribution diskette, 
  DC21040 is used as a synonym for EtherWORKS TURBO EISA (DE425-AA).

  LIST OF DRIVERS:

  The EtherWORKS TURBO EISA driver distribution diskette contains the following 
  LAN device drivers:

  DC21X4.DOS   DOS NDIS 2 driver - PATHWORKS Certified - DE425      
  DC21040.COM   Netware DOS ODI driver - Novell Tested and Approved - DE425
  DC21040.LAN   Netware ODI Server driver - Novell Tested and Aproved - DE425  
  DC21040.OS2   OS/2 NDIS 2 driver
  DC21040.SYS   Windows NT driver for i86   
  DC21040.SYS   Windows NT driver for Alpha AXP 
  DC21040.386   NDIS 3.0 driver for Windows for Workgroups 3.11 
	
  INFORMATION ON MEDIA CONFIGURATION:
  
  EtherWORKS TURBO EISA adapters support full duplex Ethernet communication
  when connected to a full duplex-compatible device.  Ensure that the 
  connected device supports full duplex mode before enabling this feature on
  your EtherWORKS TURBO EISA adapter, or serious network problems can result.

  EtherWORKS TURBO EISA device drivers accept switches that inform the adapter
  which media interface should be used.  Refer to the README.TXT file in the
  appropriate subdirectory for specific information regarding the use of these
  switches with the device driver that you require.

   DRIVER SWITCHES                 DESCRIPTIONS

   TP_FULL_DUPLEX:      Instructs the adapter to operate in full duplex mode.   

   TP:                  Default position for all drivers. When using twisted
			pair connection to the network this setting is 
			recommended.

   AUI:                 Instructs the adapter to use either the ThinWire
			(10-base2) or AUI (Thickwire) interface.  A jumper
			on the module further selects between these two
			choices.


File: A:\README.TXT                                           Page  2 of  3

   A:\README.TXT                   This file.
    | SRL.TXT                      Digital Software Replication License
    | !DEC4250.CFG                 EISA configuration file.
    | NICDIAG.EXE                  Diagnostic program.
    | DIAG.EXE                     Subroutine called by NICDIAG.EXE program.
    | DISK1                        Required for Windows NT installation.
    | RELEASE.NOT                  Technical information regarding this release.
    |
    +---\NOVELL\SERVER
    |     |    | README.TXT        Instructions for V3.1x and V4.0x server 
    |     |    |
    |     |    +---\3_1x
    |     |    |    DC21040.LAN    Device driver for Netware V3.1x
    |     |    |    AUTOEXEC.NCF   Used in addition to server AUTOEXEC.NCF
    |     |    |    DC21040.LDI    Installation file for Netware Server
    |     |    |    ETHERTSM.NLM   V2.30 EtherTSM   
    |     |    |    LSLENH.NLM     LSL for use with NetWare v3.11
    |     |    |    MONITOR.NLM    Updated monitor for use with NetWare v3.11 
    |     |    |    MSM31X.NLM     V2.30 MSM  
    |     |    |    PATCHMAN.NLM   Patch Manager for NetWare v3.11    
    |     |    |
    |     |    +---\4_0x
    |     |         DC21040.LAN    Device driver for Netware V4.0x.
    |     |         AUTOEXEC.NCF   Used in addition to server AUTOEXEC.NCF
    |     |         DC21040.LDI    Installation file for Netware Server
    |     |         ETHERTSM.NLM   Updated TSM
    |     |         MSM.NLM        Updated MSM
    |     |
    |     +--\CLIENT
    |         README.TXT           Instructions for V3.1x and V4.0x client install
    |         DC21040.COM          Netware client driver for V3.1x and V4.0x.
    |         NET.CFG              Client config file.
    |         DC21040.INS          Installation file for Netware Client
    |
    +---\NDIS\DOS
    |         | README.TXT         Instructions for NDIS DOS installation.
    |         | DC21X4.DOS        Driver for NDIS DOS.
    |         | PROTOCOL.INI       Config file for NDIS DOS.
    |         | OEMSETUP.INF       Network setup information file.
    |         |
    |         +--\PATHWRKS
    |             DC20140.DOS      NDIS2 DOS device driver 
    |             PROTOCOL.INI     Initialization file for PATHWORKS
    +---\NDIS\OS2
    |         README.TXT           Instructions for NDIS OS/2 installation.
    |         DC21X4.OS2          Driver for NDIS OS/2.
    |         PROTOCOL.INI         Config file for NDIS OS/2.
    |         DC21X4.NIF          Network Description File.
    |
    +---\NDIS\DOS\PATHWRKS
    |         DC21X4.DOS           Driver for NDIS 2 Pathworks connections.
    |         PROTOCOL.INI         Stub file for Pathworks installations.
    |
    +---\WIN_NT\INTEL              6.2 Release
    |    |  DC21040.HLP            Installation help file
    |    |  README.TXT             Instructions for Intel CPU based Windows NT.
    |    |  DC21040.INI            Windows NT .INI file.
    |    |  OEMSETUP.INF           Network setup information file.
    |    |  DC21040.SYS            Driver for Intel CPU based Windows NT.
    |    |
    |    +-\ALPHA                  6.0 Release
    |       README.TXT             Instructions for Alpha CPU based WNT.
    |       DC21040.INI            Windows NT .INI file.
    |       OEMSETUP.INF           Network setup information file.
    |       DC21040.SYS            Driver for Alpha CPU based Windows NT.
    |
    V (cont)

File: A:\README.TXT                                           Page  3 of  3

    A:\
    |
    |
    +---\WIN_NT\INTEL3_5           6.2 Release
    |    |  README.TXT             Instructions for Intel CPU based WNT 3.5.
    |    |  DC21040.HLP            Installation Help file
    |    |  OEMSETUP.INF           Network setup information file.
    |    |  DC21040.SYS            Driver for Intel CPU based Windows NT.
    |    |
    |    +-\ALPHA3_5               6.2 Release
    |       README.TXT             Instructions for Alpha CPU based WNT 3.5.
    |       DC21040.HLP            Installation Help file
    |       OEMSETUP.INF           Network setup information file.           
    |       DC21040.SYS            Driver for Alpha CPU based WNT 3.5.
    |
    +---\MSLANMAN.DOS
    |    README.TXT                Instructions for MS LAN Man.
    |    |
    |    +-------\DRIVERS\ETHERNET\DC21X4
    |                |             DC21X4.DOS  Driver for MS LAN Manager.
    |                |             PROTOCOL.INI Config file for MS LAN Man.
    |                |
    |                +---\NIF
    |                              DC21X4.NIF  Network description file.
    +---\MSLANMAN.OS2
    |    README.TXT
    |     |
    |     +-------\DRIVERS\ETHERNET\DC21X4
    |                |             DC21X4.OS2 NDIS 2 Driver for OS/2
    |                |             PROTOCOL.INI Config file for OS/2
    |                |
    |                +---\NIF
    |                              DC21X4.NIF Network description file.
    |
    +---\SCO
    |    README.TXT                DOS Format Readme.txt file for SCO 
    |    DE425.TAR                 SCO UNIX installation Kit TAR Format 
    |     
    |
    +---\WFW
	 DC21040.386               NDIS3 driver for Windows for Workgroups
	 README.TXT                Instructions for WFW 3.11 with DE434/DE435
	 OEMSETUP.INF              Network setup information file.                
