3Com (R) Corporation LAN Installation Disk
for the 3Com Megahertz LAN PC Card Family
WinCE 2.0 Information

You can use the following Windows CE Hand-held PCs 
with the LAN PC Card:

Cassiopeia Model # A11 & A20 (SH3)
LG Phenom (SH3)
Sharp Mobilon Model # HC4100 (MIPS)
Phillips Velo Model # 500 (MIPS)
Compaq C-Series (MIPS)
NEC MobilePRO 750C (MIPS)

These hand-held PCs can browse the Internet but 
cannot connect to the network like a full service 
PC connects. This PC Card supports
Windows CE 2.0 network functionality only.

To connect the LAN PC Card and install the driver, 
follow these steps:

1.  Establish a connection between the hand-held PC 
    and a Windows 98, Windows 95, or Windows NT PC 
    using a serial cable.

2.  Insert the Windows CE CD in your CD-ROM drive.

3.  Click Start and then click Run in the task bar.

3.  Insert LAN Installation Disk 1 in drive a:
    and type:
    
    a:\win_ce\setup.exe
    
    Setup guides you through  the 3c589 series driver 
    and components installation. Setup.exe is located 
    in the WIN_CE directory.

4.  Wait until the installation is complete.

5.  Do a warm reset on your hand-held PC and plug 
    in the LAN PC Card in the PCMCIA slot of the 
    hand-held PC.

6.  Type Yes when prompted to use the PC Card.

7.  Complete the TCP/IP configuration when prompted.

8.  Remove LAN Installation Disk and restart the 
    hand-held PC.
    
    Installation is complete.


%VER 1.000.000