This file contains:

   *  Minimum System Requirements

   *  Information to read before you start installing

   *  Warnings

   *  Basic Requirements for Installing 
   
   *  Instructions for Automatic Installation
    


MINIMUM SYSTEM REQUIREMENTS
---------------------------
For a successful installation, your system must meet these 
requirements:

   *  486/66 or better PC-compatible computer

   *  24 MB RAM 

   *  43 to 73 MB free hard disk space depending on components

   *  Modem with minimum speed of 14.4 kbps (28.8 kbps or faster 
      recommended)

BEFORE YOU INSTALL
------------------
Before you run the Frontier GlobalCenter Setup Program:

   *  Exit all Windows programs that are running on your computer.

   *  Read the Frontier GlobalCenter User Agreement.


WARNINGS
--------
Running the Frontier GlobalCenter Setup Program will alter your current 
Internet network settings.

The Frontier GlobalCenter Setup Program will install Microsoft(R) 
Internet 
Explorer 4.01 software on your system. If you don't want to upgrade 
your current Internet Explorer software, or if you want to use a 
Web browser other than Internet Explorer, follow the instructions 
in the file named manual.txt in the Readme folder on the 
Frontier GlobalCenter CD-ROM. 

Before you begin the installation, check that your system meets the 
basic requirements. See "Basic Requirements for Installing," next.


BASIC REQUIREMENTS FOR INSTALLING
------------------------------------
You must check that your system meets the basic requirements 
before you install. 

1.  From the Start Menu, choose Settings, and then choose 
    Control Panel.

2.  In the Control Panel, double-click the Network icon, and then 
    select the Services tab at the top of the Network window.

3.  Check that the Network Services list includes both Remote Access 
    Services and Simple TCP/IP Services.

    If one or both of these services is not listed, you need to 
    install them now.  

4.  To install network services, click Add in the Network window, 
    and then select the service that you need to install from the 
    Select Network Service list.  

    When installing Remote Access Services, Windows NT tries to 
    automatically detect your Ethernet card. If the operating system 
    cannot detect what type of Ethernet card you have, or if you 
    do not have an Ethernet card, Windows NT prompts you to select 
    an Ethernet card from the Network Adapter list. If you do not 
    have an Ethernet card, select MS Loopback Adapter from the list.  
   
    Windows NT may also try to automatically detect your modem if 
    you have not previously installed one. Click Continue.

5.  In the Network Window, verify that both Remote Access Services 
    and Simple TCP/IP Services are installed, and then click the 
    Protocols tab. 

    Verify that the TCP/IP Protocol is installed. If this protocol 
    is not installed, you need to install it now.

6.  To install the TCP/IP Protocol, click Add, and then select 
    TCP/IP from the protocols list. You may be asked to load your 
    original Windows NT CD-ROM during this portion 
    of the setup. 

7.  Verify that Remote Access Services, Simple TCP/IP Services, and 
    TCP/IP Protocol are all installed, and then click Close in the 
    Network Window. 

    When the operating system advises that it needs to restart your 
    computer, click Yes.



INSTRUCTIONS FOR AUTOMATIC INSTALLATION
---------------------------------------
This section provides instructions for Frontier GlobalCenter installation 
and account setup.

The Frontier GlobalCenter Setup Program starts by launching the 
Microsoft Internet Explorer Setup program. To install the Internet 
Explorer software, follow the prompts and instructions that appear 
on your screen.

   *  In the Destination Folder window, click Ok to install
      Internet Explorer in the default destination, or 
      browse for the path to a different folder. Frontier GlobalCenter
      recommends that you install Internet Explorer in its
      default destination, if possible. 

   *  If Internet Explorer software is currently installed on your 
      system, the Setup program prompts you to upgrade or 
      reinstall components. 

When the Internet software has been installed and the Setup Program 
advises that it must restart your computer, click OK. 
(Do NOT manually restart your computer!)

After your computer restarts, you must access the Frontier GlobalCenter 
online registration system. Follow these steps:

1. Locate and double-click the Internet Explorer icon on your 
   desktop.

2. Enter the information that the registration system requests.

3. When registration is complete, your Frontier GlobalCenter username, 
   password, and local access phone number are configured on 
   your system.


If you have any problems with this installation, 
contact Frontier GlobalCenter's 24-hour Technical Support 
at 1-800-463-8386, option 4.


------------------------------------------------------------------
Microsoft is a registered trademark in the United States and other
countries. Microsoft Internet Explorer and Windows are registered 
trademarks of the Microsoft Corporation.

(C) 1997 Frontier GlobalCenter, Inc. Frontier GlobalCenter and the 
Frontier GlobalCenter logo 
are trademarks of Frontier Communications, Inc.