USBAUDIO.TXT File Version 1.01 for
Universal Serial Bus (USB) Digital Audio Device Driver Support for OS/2
August 10, 1999
(c) Copyright International Business Machines Corporation, 1998,1999.
    All rights Reserved.


Contents
========
1.0  Overview
2.0  USB-Audio Driver Installation Instructions
3.0  USB-Audio Driver Un-Install Instructions
4.0  Requirements


1.0  Overview
=============

This USBAUDIO.EXE driver package provides you with IBM's most current support
for Universal Serial Bus (USB) digital audio devices on the OS/2 Operating
System.

1.1  The USBAUDIO.EXE file that you received contains the following 3 USB
     files in a self-extracting compressed format.

        -  USBAUDIO.TXT  This file that you are reading
        -  USBAUDIO.SYS  USB Digital Audio Driver
           CARDINFO.DLL
           CONTROL.SCR
           GENIN.DLL
           GENINMRI.DLL
           USBAUDIO.HLP
           USBAUDIO.ICO
           USBUADIO.SCR


2.0  USB-Audio Installation Instructions
===========================================

2.1  To use these USB driver files, you must expand the USBAUDIO.EXE file into
     its component files by
        (a.) opening an OS/2 window and
        (b.) typing USBAUDIO at the OS/2 command prompt.
     Once the USBAUDIO.EXE file is expanded, please continue with the
     USB Installation Instructions.

2.2 At the OS/2 command prompt, type MINSTALL.
        i.   Change the source drive to the subdirectory containing the files
             expanded by USBAUDIO
        ii.  Select the USB adapter
        iii. When prompted, select 1 for the number of adapters to install.
        iv.  If an error occurs, check the MINSTALL.LOG file in the
             \MMOS2\INSTALL subdirectory of the boot drive.

2.3 This completes the installation procedure. You must now REBOOT you system
    to initialize the USB digital audio device driver support.


3.0  USB-Audio Un-Install Instructions
================================

3.1 At the OS/2 command prompt, type MINSTALL.
        i.   Change the source drive to the subdirectory containing the files
             expanded by USBAUDIO
        ii.  Select the USB adapter
        iii. When prompted, select 0 for the number of adapters to install.
             This will uninstall USB Digital Audio.
        iv.  If an error occurs, check the MINSTALL.LOG file in the
             \MMOS2\INSTALL subdirectory of the boot drive.

3.2  Safely shut down and then re-boot your system in order to remove the
     USB Digital Audio driver from the system configuration.

4.0  Requirements
=================

4.1  Hardware

4.2  Software
     (a.) USB Basic support
     (b.) MMPM/2

(end)