           Initio INI-6100/6102 Device Driver V1.04 for DOS(Windows)
           ----------------------------------------------------------

1. Overview

   Under Microsoft DOS operating System, the INI-6100/6102 host adapter BIOS
will provide the necessary function to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (and up to seven) hard disk drives for DOS 5.0 and above.

    You don't have to install device drivers to access hard disk. However
you need to install ASPI(Advanced SCSI Programming Interface) device driver to
support other SCSI devices(CDROM, Tape, or Scanner)

   The DOSSETUP utility will install the ASPI device driver(ISPI610.SYS) for
DOS 3.3.1 or later.


2. Installation Procedures


   1. Insert the diskette into your floppy drive.


   2. Change to the drive letter that contains the diskette.

        C:>A:                 or            C:>B:

   3. Type DOSSETUP.

        A:>DOSSETUP           or            B:>DOSSETUP



3. Driver Configuration Options

   /D	    Verbose mode provides detail information about driver when
            driver is inititalized
   /L	    Drvier scan eight LUNs for each SCSI Target.
   /CCBSx   defines the maximum number of concurrent I/O that driver supports.
            The range for "x" is from 1 to 16.
