

		 INI-9100/9100W Windows-NT device driver Installation
		 ====================================================


   FILES YOU NEED:
     script files for installation:
		txtsetup.oem, oemsetup.inf, disk1.
     device driver:
		ini910.sys


   INSTALLATION:

   A: Install Windows-NT on a hard drive from the INI-9100/9100W SCSI Host adapter :
   -------------------------------------------------------------------------
	 1. If you are installing Windows-NT from a floppy drive, locate the
		Windows-NT Disk 1 for Floppy Installation. Make a backup copy of
		this diskette.

	 2. If you are installing Windows-NT from a CD-ROM drive, locate the
		Windows-NT Setup Disk for CD-ROM Installation. Make a backup copy
		of this diskette.

	 3. Put the disk into drive A and turn on your computer.

	 4. Follow the instruction, select "CUSTOM SETUP".

	 5. Select "OTHER" from the list of "Additional Scsi Adapters". A
		message will appear on screen stating that, "Requires disk provided
		by a hardware manufacture". Insert the diskette containing 
		INI-9100/9100W device driver and press ENTER.

	 6. WIndows-NT will interpret txtsetup.oem and oemsetup.inf script
		files and load ini910.sys driver to xxx/system32/drivers directory.
		( Assume xxx is the root directory for WIndows-NT).

   B: Adding INI-9100/9100W host adapter to existing Windows-NT booted from IDE
	  drive or different type of host adapter:
   -------------------------------------------------------------------------

	 1. Boot up Windows-NT.

	 2. Select "Windows NT SetUp" from the "MAIN" group.

	 3. Select "Options".

	 4. Select "Add/remove SCSI Adapters" from the list of available options.

	 5. Select "Add" to add a host adapter driver.

	 6. Select "Others" from the list of driver providers.

	 7. Insert INI-9100/9100W driver diskette into drive A: then select "OK".

	 8. WIndows-NT will interpret txtsetup.oem and oemsetup.inf script
		files and load ini910.sys driver to xxx/system32/drivers directory.
		( Assume xxx is the root directory for WIndows-NT).

	 9. Exit the Windows-NT Setup program and reboot the system to include
		the INI-9100/9100W driver for Windows-NT in the initialization routine.



	-C: Updating device driver ini910.sys:
   -------------------------------------------------------------------------
	 ( Assume "xxx" is the system root directory of the Windws NT )

		1. Copy new ini910.sys to xxx/system32/drivers.

		2. If Boot drive is a SCSI drive, and you are using WIndows-NT 3.1,
		   (You don't need this step for Windows-NT 3.5)
		   a. Type      "attrib -r -s -h c:\ntbootdd.sys"
		   b. Copy new ini910.sys to c:\ntbootdd.sys.
		   c. Type "attrib +r +s +h c:\ntbootdd.sys".

		3. Reboot the system.

