PCIYMF.TXT File Version 1.01 for
PCI Yamaha YMF724 (DS-1) Audio Device Driver Support for OS/2
August 16, 1999
(c) Copyright International Business Machines Corporation, 1998,1999.
    All rights Reserved.


Contents
========
1.0  Overview
2.0  PCI Yamaha YMF724 (DS-1) Audio Driver Installation Instructions
3.0  PCI Yamaha YMF724 (DS-1) Audio Driver Un-Install Instructions
4.0  Requirements
5.0  Driver Limitation

1.0  Overview
=============

This PCIYMF.EXE driver package provides you with IBM's most current support
for PCI Yamaha YMF724 (DS-1) audio device on the OS/2 Operating System.

1.1  The PCIYMF.EXE file that you received contains the following 2
     files in a self-extracting compressed format.

        -  PCIYMF.TXT  This file that you are reading
        -  YMF724.SYS  PCI Yamaha YMF724 (DS-1) Audio Driver
           YMF724.HLP
           CARDINFO.DLL
           CONTROL.SCR
           GENIN.DLL
           GENINMRI.DLL
           MIDIMAP.DLL
           MIDIMAP.SCR
           VYMF724.SYS
           AUDFILES.SCR

2.0  PCI Yamaha YMF724 (DS-1) Audio Driver Installation Instructions
======================================================

2.1  To use these driver files, you must expand the PCIYMF.EXE file into
     its component files by
        (a.) opening an OS/2 window and
        (b.) typing PCIYMF at the OS/2 command prompt.
     Once the PCIYMF.EXE file is expanded, please continue with the
     Installation Instructions.

2.2 At the OS/2 command prompt, type MINSTALL.
        i.   Change the source drive to the subdirectory containing the files
             expanded by YMF724
        ii.  Select the YMF724 PCI Audio Adapter
        iii. When prompted, select 1 for the number of adapters to install.
        iv.  If an error occurs, check the MINSTALL.LOG file in the
             \MMOS2\INSTALL subdirectory of the boot drive.

2.3 Since you just add new audio adapter, you may need to enable the hardware
    detection by using either one of the following methods:
        i.   Use the right mouse button while the mouse is positioned on
             the Hardware Manager icon.  Select Properties from the pull-down,
             go to Detection Level and select 'Detect Added Hardware'
        ii.  Or reboot system and activate the RECOVERY menu during OS/2 start
             up by briefly holding down and releasing Alt-F1.   Then select F5
             to enable full hardware detection.

2.4 This completes the installation procedure. You must now REBOOT your system,
    to initialize the PCI Yamaha audio device driver support.


3.0  PCI Yamaha YMF724 (DS-1) audio driver Un-Install Instructions
====================================================

3.1 At the OS/2 command prompt, type MINSTALL.
        i.   Change the source drive to the subdirectory containing the files
             expanded by YMF724
        ii.  Select the YMF724 PCI Audio Adapter
        iii. When prompted, select 0 for the number of adapters to install.
             This will uninstall PCI Yamaha YMF724 (DS-1) Audio driver.
        iv.  If an error occurs, check the MINSTALL.LOG file in the
             \MMOS2\INSTALL subdirectory of the boot drive.

3.2  Safely shut down and then re-boot your system in order to remove the
     Yamaha Audio driver from the system configuration.

4.0  Requirements
=================

4.1  Hardware

4.2  Software
     (a.) PCI Yamaha YMF724 (DS-1) driver
     (b.) MMPM/2

5.0  Driver Limitation
======================

5.1  WIN/OS2 will not be supported for PCI Yamaha YMF724 (DS-1) Audio Controller.

(end)