---------------------- Weitergeleitet von Karlheinz Schmidthaus/KSEDV/DE am
24.04.2001 16.50 ---------------------------
nwclos2n.zip

"Karlheinz Schmidthaus" <k.schmidthaus@ksit.de> am 24.04.2001 08.07.20

Bitte antworten an eComStation@yahoogroups.com

An:    eComStation@yahoogroups.com
Kopie:
Thema: Re: [eCS] NetWare Client V2.12 for OS/2



Some Information to install the Netware Client:

* Extract the archive in a temporary directory
* start the installation by running INSTALL.EXE and follow the
instructions.
* Select one of the ODI - driver, it must not be the real one because it
  will removed later.
* After installation - before you shutdown and restart the system - use
  MPTS to add the "IBM Netware Requester Support". This will remove the
  installed ODI driver and map it to the NDIS interface.
* Important: You need to change/check the type of frame header because
  the token ring frame is the default setting.
* Additional you need to enter the network adapter address for the
  "IBM Netware Requester Support" protocol.
  If you don't know the address, you can find it in the LANTRAN.LOG
  after the next system startup.


Karlheinz Schmidthaus
Germany, 24.04.2001