

	********* Firmware Version 4.08a release note *********
						     Date:04/25/92

   1. In the V.25 bis command state, CTS will follow the DTR signal.

   2. In the V.25 bis command state, modem ignore (no parity checking) the
      8th bit of 8-bit data unit within message frame.

   3. Add RST command for V.25 bis to switch back to async AT command mode.

   4. If bit 6 of s41 was set (s41=64), ATS0=1 is forbiden. Modem will
      answer after the second ring.

   5. FAX performance under TAS 3002 channel is improved.

   6. FAX carrier lost detection is improved.

   7. Deviation in echo cancelation measurement is corrected.

   8. Support AT+FAA?, AT+FAA= now.

   9. Note: If AT+FCLASS=2 has been issued to send or receive FAX, you must
	    issue an AT+FCLASS=0 to initiate a data call.


	********* Firmware Version 4.08b release note *********
						     Date:04/30/92

   1. Detection improved in multi-auto call 2400 modem.

