======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
    WG1002: MICROSOFT MAIL 3.2 SCHEDMSG.DLL CORRECTS FRENCH HEADERS
                  IN WINDOWS(TM) FOR WORKGROUPS MAIL
======================================================================
                                                   Revision Date: 2/94
                                                       1 Disk Included

The following information applies to Microsoft Windows for Workgroups,
version 3.11.

-----------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1994 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft and MS-DOS are registered trademarks and Windows is a     |
| trademark of Microsoft Corporation.                                 |
|---------------------------------------------------------------------|

INTRODUCTION
============

When you reply to a reply from a Windows for Workgroups 3.11 Schedule+
meeting request, the header information may be converted to French.
For example, the header appears as follows:

   ----------------
   De: <User B>
   A: <User A>
   Date d'envoi: <dddddddd, mmmmmmm dd, yyyy, hh:mmPM/AM>
   Objet: YES: <Subject text>

   Microsoft Mail v3.0 IPM.Microsoft Schedule.MtgRespP
   To: <User A>
   Date Sent: <yyyy-mm-dd, hh:mm>
   Période: <ddd, mmm dd, yyyy,  hh:mmPM/AM - hh:mmPM/AM>
   Subject: YES: <Subject text>

The WG1002 disk included with this Application Note contains the
SCHEDMSG.DLL file from Microsoft Mail version 3.2. Using this file
with Windows for Workgroups version 3.11 Mail and Schedule+ corrects
the problem noted above.

To install the updated SCHEDMSG.DLL file
----------------------------------------

1. Quit Windows for Workgroups.

2. Make a backup copy of the currently installed SCHEDMSG.DLL file by
   typing the following at the MS-DOS command prompt and then pressing
   ENTER

      ren <drive>:<path>\schedmsg.dll schedmsg.old

   where <drive>:<path> is the location of your Windows SYSTEM
   subdirectory.

   For example, if your Windows directory is called WINDOWS and is on
   drive C, type the following at the MS-DOS command prompt and then
   press ENTER:

      ren c:\windows\system\schedmsg.dll schedmsg.old

3. Insert the enclosed WG1002 disk in the appropriate floppy disk
   drive.

4. To copy the file to the Windows SYSTEM subdirectory, type the
   following at the MS-DOS command prompt and then press ENTER

      copy <drive>:\schedmsg.dll <destination>

   where <drive> is the floppy disk drive containing the WG1002 disk
   and <destination> is the drive and directory of your Windows SYSTEM
   subdirectory.

   For example, if the WG1002 disk is in drive A and your Windows
   directory is called WINDOWS and is on drive C, type the following
   at the MS-DOS command prompt and then press ENTER:

      copy a:\schedmsg.dll c:\windows\system