Windows NT Floppy Enabler Driver Changes

With the release of Windows NT version 4.0, the drivers for the floppy
enabliers have been included in the Windows NT Driver Library (\DRVLIB)
included on the Windows NT version 4.0 compact disc. 

The following drivers are available:
	cmsfcxx.sys for the following adapters:
		CMS FC-10
		CMS FC-20
		TC-15
	genflpy.sys for the following adapters:
		Conner (adapter has no name on card)


Please see the Windows NT Hardware Compatibility List for additional 
information on these storage adapters.

To install drivers after running Windows NT version 4.0 Setup:

1.      After installing the floppy enablier adapter and tape drive in 
	your machine, boot into Windows NT version 4.0 as normal.
2.      From the Start button, open Settings, open Control Panel, then
	open the Tape Devices program.
3.      Select the Drivers tab, then click the Add button.
4.      Click the Have Disk button, point to DrvLib\Storage\Fenb\CMS (or Conner)
	and click OK.
5.      Accept the driver from the line presented and click 
	OK, then set correct adapter settings from Driver Options choices,
	click Continue to load the driver, then retype the DrvLib path.
6.      You need to reboot your Windows NT version 4.0 system to 
	activate the driver. Choose Yes to shutdown and restart.
7.	After the floppy enablier driver is loaded, the QIC117 driver must
	also be loaded using the Tape Devices applet in Control Panel.
8.	If NTbackup program does not recognize the tape driver, review power
	and cable connections to tape drive. The above steps can be repeated
	also without injury to program or body.