How to install on the Windows NT 4.0 platform (both Intel and Alpha):


(use this for NT Backup Utility and Legato NetWorker).

Note: Verify that your tape drive is properly connected before starting
 the driver installation. Since NT 4.0 would only allow you to
sequentially install tape device drivers, if there are other tape 
devices with uninstalled drivers, please install their drivers before
attempting the following procedure or click the CANCEL button to bypass 
each tape device. 

1. Using the My Computer icon or Windows NT Explorer, verify that the 
driver files were in C:\temp\release directory.

2. Using the Start-Settings path or the My Computer icon, bring up the
 Control Panel. 

3. Double-click the Tape Devices applet (icon). 

4. The Tape Devices dialog box is displayed indicating the driver for
 the new tape drive is not loaded. If the system does not automatically
 scan for new devices, select "Detect". This scanning process will 
 create a list of device drivers available for installation. 

5. In the resulting "Install Driver" dialog box, click "Have Disk"
 to bring up the "Install From Disk" dialog box. 

6. In the "Copy manufacturer's files from" field, enter the driver path
 as C:\temp\release and then select OK.  

7. In the resulting "Install Driver" dialog, select the appropriate 
 driver for your tape drive. Select OK. 

8. In the "New SCSI Tape Device Found" dialog box, click OK. 

9. In the "Tape Devices" dialog box, click OK. This step completes the
 driver installation. Restart your system to complete the installation. 
